Conferences related to Pistons

Back to Top

2016 IEEE International Ultrasonics Symposium (IUS)

International Symposium dealing with recent developments on ultrasound, including ultrasound imaging, transducers, non destructuve testing and physical acoustics.

  • 2015 IEEE International Ultrasonics Symposium (IUS)

    Annual meeting of the UFFC Society that is being held regularly. It is focusing on ultrasonics.

  • 2013 IEEE International Ultrasonics Symposium (IUS)

    the joint IUS, ISAF, IFC, and EFTF conference is aimed at bringing the ultrasonics, ferroelectrics, Frequency Control and Time Forum communities around the world together more closely and through discussions on recent research and development of fundamentals, materials, devices, and applications .

  • 2012 IEEE International Ultrasonics Symposium

    The conference will bring together the community of ultrasonics around the world in the center of Europe for discussion and cooperation and to stimulate the research and development in the widespread field of ultrasonic theories and applications

  • 2011 IEEE International Ultrasonics Symposium (IUS)

    The Symposium is aimed at bringing the ultrasonics communities around the world together more closely and through discussions on recent research and development of ultrasonics theories and applications.

  • 2010 IEEE Ultrasonics Symposium (IUS)

    The conference will cover all high frequency Ultrasound application including medical.

  • 2009 IEEE International Ultrasonics Symposium

    Conference includes short courses on topics of current interest in ultrasonics. The next three days will include parallel oral and poster sessions covering 1) Medical Ultrasonics, 2) Sensors, NDE & Industrial Applications, 3) Physical Acoustics, 4) Microacoustics SAW, FBAR, MEMS, and 5) Transducers & Transducer Materials.

  • 2008 IEEE Ultrasonics Symposium

  • 2007 IEEE Ultrasonics Symposium


2014 IEEE Custom Integrated Circuits Conference - CICC 2014

The IEEE Custom Integrated Circuits Conference (CICC) is the premier conference devoted to IC development. CICC showcases original, first-published innovative analog and digital circuit techniques covering a broad spectrum of technical topics. It is a forum for circuit, IC and SoC designers, CAD developers, manufacturers and ASIC users. CICC is the conference to find out how to solve design problems and improve circuit design and chip design techniques.

  • 2013 IEEE Custom Integrated Circuits Conference - CICC 2013

    The IEEE Custom Integrated Circuits Conference (CICC) is the premier conference devoted to IC development. CICC showcases original, first-published innovative analog and digital circuit techniques covering a broad spectrum of technical topics. It is a forum for circuit, IC and SoC designers, CAD developers, manufacturers and ASIC users. CICC is the conference to find out how to solve design problems and improve circuit design and chip design techniques.

  • 2012 IEEE Custom Integrated Circuits Conference - CICC 2012

    The IEEE Custom Integrated Circuits Conference (CICC) is the premier conference devoted to IC development. CICC showcases original, first-published innovative analog and digital circuit techniques covering a broad spectrum of technical topics. It is a forum for circuit, IC and SoC designers, CAD developers, manufacturers and ASIC users. CICC is the conference to find out how to solve design problems and improve circuit design and chip design techniques.

  • 2011 IEEE Custom Integrated Circuits Conference - CICC 2011

    CICC showcases first-published innovative analog and digital circuit techniques.

  • 2010 IEEE Custom Integrated Circuits Conference - CICC 2010


2013 IEEE Aerospace Conference

The international IEEE Aerospace Conference is organized to promote interdisciplinary understanding of aerospace systems, their underlying science and technology, and their applications to government and commercial endeavors. The annual, weeklong conference, set in a stimulating and thought -provoking environment, is designed for aerospace experts, academics, military personnel, and industry leaders.

  • 2012 IEEE Aerospace Conference

    The international IEEE Aerospace Conference is organized to promote interdisciplinary understanding of aerospace systems, their underlying science and technology, and their applications to government and commercial endeavors. The annual, weeklong conference, set in a stimulating and thought-provoking environment, is designed for aerospace experts, academics, military personnel, and industry leaders.

  • 2011 IEEE Aerospace Conference

    The international IEEE Aerospace Conference is organized to promote interdisciplinary understanding of aerospace systems, their underlying science and technology, and their applications to government and commercial endeavors.

  • 2010 IEEE Aerospace Conference

    The international IEEE Aerospace Conference is organized to promote interdisciplinary understanding of aerospace systems, their underlying science and technology, and their applications to government and commercial endeavors.

  • 2009 IEEE Aerospace Conference

    The international IEEE Aerospace Conference promotes interdisciplinary understanding of aerospace systems, their underlying science and technology, and their applications to government and commercial endeavors. It is an annual, week-long conference designed for aerospace experts, academics, military personnel, and industry leaders and is set in a stimulating, thought-provoking environment.

  • 2008 IEEE Aerospace Conference

    The international IEEE Aerospace Conference is organized to promote interdisciplinary understanding of aerospace systems, their underlying science and technology, and their applications to government and commercial endeavors. It is an annual, week-long conference designed for aerospace experts, academics, military personnel, and industry leaders and is set in a stimulating and thought-provoking environment.


2012 IEEE International Conference on Automation and Logistics (ICAL)

Automation, logistics, and related areas.


2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering (CMCE 2010)

CMCE 2010 provides numerous opportunities for attendees to increase their knowledge and understanding of all aspects of Computer, Mechatronics, Control and Electronic Engineering. It is also an outstanding chance to meet and network with reliability colleagues from around the world.



Periodicals related to Pistons

Back to Top

Control Systems Technology, IEEE Transactions on

Serves as a compendium for papers on the technological advances in control engineering and as an archival publication which will bridge the gap between theory and practice. Papers will highlight the latest knowledge, exploratory developments, and practical applications in all aspects of the technology needed to implement control systems from analysis and design through simulation and hardware.


Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control was the number-three journal in acoustics in 2002, according to the annual Journal Citation Report (2002 edition) published by the Institute for Scientific Information. This publication focuses on the theory, design, and application on generation, transmission, and detection of bulk and surface mechanical waves; fundamental studies in physical acoustics; design of sonic ...




Xplore Articles related to Pistons

Back to Top

Study of a circuit-breaker arc with self-generated flow. I. Energy transfer in the high-current phase

A. Gleizes; A. M. Rahal; H. DeLacroix; P. Van Doan IEEE Transactions on Plasma Science, 1988

This study deals with the first phase of operation, corresponding to the energy transfer between arc and gas and to the pressure rise. The experimental study is devoted to measurements of current, arc voltage, and pressure variations in N/sub 2/ and SF/sub 6/. For currents of the order of 10 kA the mean measured electric field was about 32 V/cm ...


Study on the screening of materials for the friction pairs in an axial piston swashplate seawater hydraulic pump

Tang Qunguo; Wang Yuanmei; Hu Haolong; Li Xiaohui Fluid Power and Mechatronics (FPM), 2015 International Conference on, 2015

Choosing the appropriate materials for the friction pairs in a swashplate axial piston hydraulic pump fully lubricated with seawater is very important in order to overcome the problems related to corrosion, friction and wear. Many different types of materials including engineering ceramics such as zirconia, silicon nitride, engineering polymer composites polyetheretherketone, and corrosion-resistant alloys like bronze, stainless steel were investigated ...


ESTER: experiencing smell through electronic reality

V. Viswadhara Meenakshi; K. Sowmya Consumer Electronics, 2003. ICCE. 2003 IEEE International Conference on, 2003

The aim of our paper is to give the consumers of the virtual world a truly virtual experience by adding one more dimension - the sense of smell. We have accomplished this by means of a special electromechanical device specifically designed by us for this purpose. According to the type of application the ESTER is associated with, it will dispense ...


Static stress and modal analysis of water hydraulic reciprocating piston pump driven by the linear motor

Huang Yeqing; Nie Songlin; Ma Kai; Liu Fan; Li Lei Fluid Power and Mechatronics (FPM), 2015 International Conference on, 2015

In recent years, with the mature of linear motor technology, linear motor has been more and more widely applied in the field of hydraulics. The water hydraulic reciprocating piston pump driven by linear motor has the advantages of constant flow and low vibration. Compared with traditional piston pump which can only regulate the movement of the pump by means of ...


Measurement of arc energy during insulation ignition

W. H. Middendorf; M. Kirshteyn IEEE Transactions on Electrical Insulation, 1988

A digital arc energy meter was developed for insulation-ignition measurements. The meter takes 54 discrete samples of the current through, and voltage across, the electrodes during each 60-Hz cycle. It multiplies the values, sums the products, multiplies the sum of products by the sampling time (time between samples), and displays the result in Joules. The computation is accurate to 3%. ...


More Xplore Articles

Educational Resources on Pistons

Back to Top

eLearning

Study of a circuit-breaker arc with self-generated flow. I. Energy transfer in the high-current phase

A. Gleizes; A. M. Rahal; H. DeLacroix; P. Van Doan IEEE Transactions on Plasma Science, 1988

This study deals with the first phase of operation, corresponding to the energy transfer between arc and gas and to the pressure rise. The experimental study is devoted to measurements of current, arc voltage, and pressure variations in N/sub 2/ and SF/sub 6/. For currents of the order of 10 kA the mean measured electric field was about 32 V/cm ...


Study on the screening of materials for the friction pairs in an axial piston swashplate seawater hydraulic pump

Tang Qunguo; Wang Yuanmei; Hu Haolong; Li Xiaohui Fluid Power and Mechatronics (FPM), 2015 International Conference on, 2015

Choosing the appropriate materials for the friction pairs in a swashplate axial piston hydraulic pump fully lubricated with seawater is very important in order to overcome the problems related to corrosion, friction and wear. Many different types of materials including engineering ceramics such as zirconia, silicon nitride, engineering polymer composites polyetheretherketone, and corrosion-resistant alloys like bronze, stainless steel were investigated ...


ESTER: experiencing smell through electronic reality

V. Viswadhara Meenakshi; K. Sowmya Consumer Electronics, 2003. ICCE. 2003 IEEE International Conference on, 2003

The aim of our paper is to give the consumers of the virtual world a truly virtual experience by adding one more dimension - the sense of smell. We have accomplished this by means of a special electromechanical device specifically designed by us for this purpose. According to the type of application the ESTER is associated with, it will dispense ...


Static stress and modal analysis of water hydraulic reciprocating piston pump driven by the linear motor

Huang Yeqing; Nie Songlin; Ma Kai; Liu Fan; Li Lei Fluid Power and Mechatronics (FPM), 2015 International Conference on, 2015

In recent years, with the mature of linear motor technology, linear motor has been more and more widely applied in the field of hydraulics. The water hydraulic reciprocating piston pump driven by linear motor has the advantages of constant flow and low vibration. Compared with traditional piston pump which can only regulate the movement of the pump by means of ...


Measurement of arc energy during insulation ignition

W. H. Middendorf; M. Kirshteyn IEEE Transactions on Electrical Insulation, 1988

A digital arc energy meter was developed for insulation-ignition measurements. The meter takes 54 discrete samples of the current through, and voltage across, the electrodes during each 60-Hz cycle. It multiplies the values, sums the products, multiplies the sum of products by the sampling time (time between samples), and displays the result in Joules. The computation is accurate to 3%. ...


More eLearning Resources

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Pistons"

IEEE-USA E-Books

  • Towards a theory of how bats navigate through foliage

    In this paper we study echolocation by spectral analysis as a possible mechanism used by bats to navigate through their natural environment. We simulate the echo signals received by a bat inspired sonar system confronted with realistic reflectors, i.e. a large number of closely spaced scatterers. We propose a method to localize such natural reflectors on the basis of the time-frequency representation of the returned echo that is calculated by the bat's cochlea. The sonar system is simplified into a piston emitter and two piston receivers, of which the latter can be rotated. The method proposed reconstructs the environment by comparing the returned echoes with predefined templates corresponding with echoes from different angles. We show that the overlap between members of this set of templates can be used as a measure of their accuracy for localization purposes. This method is then applied to both monaural and binaural sonar systems and is shown to allow useful navigation behaviour. The problem of ghost images, i.e. erroneous interpretations of ambiguous position estimates, is shown to be inherent to single measurement based decisions. Finally, we show how active control of the ear configuration allows binaural sonar systems to eliminate ghost images by combining the resuits from a sequence of measurements, each corresponding with a well chosen ear configuration. Despite the description in this paper being restricted to the two-dimensional situation, this is not essential and we discuss how the mechanism described can be straightforwardly extended to the full 3D case.

  • Appendix C: The Stirling Engine

    This appendix contains sections titled: Introduction Stirling Cycle Displacer Stirling Engine Two-Piston Stirling Engine References

  • Supercharged Engines and Their Performance

    This chapter contains sections titled: Definitions, Supercharging of Spark- Ignition Engines, Supercharging of Aircraft Engines, Supercharging of Automobile Engines, Supercharging of Diesel Engines, Supercharging for Heavy Vehicles, Aftercooling, Further Reading, Performance Computations, Highly Supercharged Diesel Engines, Free-Piston Powerplants, Effects of Pe/Pi Ratio, Illustrative Examples

  • Engine Design II: Detail Design Procedure, Power-Section Design

    This chapter contains sections titled: General Problems in Detail Design, Screw Fastenings, Engine Illustrations, Design-Ratio Tables, 11-2 Through 11-9, The Power Train, Cylinder Design, Piston Design, Connecting Rods, Crankshaft Design, Crankcase Design, Engine Bearings

  • Interpreting Relationships between the Social and the Material

    This chapter contains sections titled: Creating Discursive Realities, The Piston Group, The Strut Group

  • Devices for the transfer of heat and work

    This chapter contains sections titled: Flow of fluids in ducts, Isentropic expansion of fluids in nozzles, Effect of back pressure on flow in nozzles, Nozzle efficiency, Heat and work effects in the compression and expansion of fiuids, Classification of compressors and expanders, Reciprocating piston compressors, Rotary compressors, Reciprocating expansion engines, Dynamic compressors and expanders, Turbines, Turbo-compressors, Efficiency of turbo- machinery, Refrigeration and gas liquefaction, Minimum work of refrigeration, Refrigeration cycles, Modification to the vapour-compression cycle, Low temperature gas liquefaction, Liquefaction processes, Production of power, Problems, Answers, Notes



Standards related to Pistons

Back to Top

No standards are currently tagged "Pistons"