40 resources related to Optical reflection
- Conferences related to Optical reflection
- Xplore Articles related to Optical reflection
- Jobs related to Optical reflection
- Educational Resources on Optical reflection
- Standards related to Optical reflection
RF and Microwave Measurement Techniques
2013 IEEE International Topical Meeting on Microwave Photonics (MWP 2013)
The International Topical Meeting on Microwave Photonics provides a forum for the presentation of new advances in microwave photonic devices, systems, and applications areas such as wireless communication systems, antenna remoting, optically controlled phased array antennas, and the optical processing of microwave, millimeter-wave, and even THz-band signals.
2011 Joint International Symposium on Optical Memory & Optical Data Storage (ISOM/ODS)
The Joint International Symposium on Optical Memory and Optical Data Storage 2011 (ISOM/ODS 2011) Reflects the international nature of the interest and work in optical data storage, these two conferences are held jointly every third year. The unparalleled setting of this conference provides an outstanding opportunity to share the latest information in this dynamic field with your international colleagues.
Gerasimchuk, T.; Katok, V.; Manko, A. Laser and Fiber-Optical Networks Modeling, 2003. Proceedings of LFNM 2003. 5th International Workshop on, 2003
Use of fiber lightguides as directing systems is caused by performance of total reflection conditions. One of conditions is excess of critical value of the hade. Thus, the critical angle is defined with respect to refractive index of the core and cover of fiber lightguide. In such cases, fiber transfer constant becomes dependent on wavelength, and optical fiber acquires filtering ...
Keun Yeong Cho; Yong Jik Lee; Choi, H.Y.; Murakami, A.; Agata, A.; Takushima, Y.; Chung, Y.C. Lightwave Technology, Journal of, 2009
We investigate the effects of the discrete reflection on the performances of upstream and downstream signals in the wavelength-division-multiplexed passive optical network (WDM PON) implemented in a single-fiber loopback configuration using the reflective semiconductor optical amplifiers (RSOAs). We first analyze the optical beat interference (OBI) noise caused by the discrete reflection, and clarify the relation between the reflection tolerance and ...
Chen, Q.H.; Wu, W.G.; Wang, Z.Q.; Yan, G.Z.; Hao, Y.L. Lightwave Technology, Journal of, 2010
A reflection-type MEMS multifunction-integrated optical device using the combined in-plane and out-of-plane motion of a dual-slope mirror is proposed. The motion of the mirrors results in the corresponding optical axis offsets in the transmitting and receiving optical signals, which can enable the device with variable optical power splitting, optical switching and variable optical attenuating functions. The optical models for splitting ...
Kuang-Chao Fan; Wu-Lang Lin; Li-Hung Chiang; Shou-Heng Chen; Tien-Tung Chung; Yao-Joe Yang Lightwave Technology, Journal of, 2009
This paper presents the design, fabrication, alignment and experimental tests of a 2times2 mechanical optical switch. The key component of the mirror device is fabricated by the MEMS process that coats both sides with an ultrathin high reflection Au/Cr film (thickness less than 1.8 microns and roughness 5.7 nm) to allow double-sided reflection. The mirror is mounted on a thin ...
Kurokawa, S.; Hirose, M.; Komiyama, K. ARFTG Conference, 2006 67th, 2006
We have proposed the optical fiber link antenna measurement system that can measure the calibrated S11 and S21 between two antennas under test (AUT) after OSLT calibration in one-pass two-port system. Our system consists of the transmitting and receiving optical-fiber link systems. The transmitting system consists of the electro-absorptive modulator, erbium doped fiber optical amplifier (EDFA), optical fiber, zero biased ...
Johnson, Larry Fiber Optic Connectors - Termination and Testing, 2009
In this tutorial we will review the methods used to bond, hold and align optical fibers for factory and field terminations. Scribing tools and techniques will also be covered. Next, proper polishing of the optical endface will be reviewed as well as the importance of cleaning optical surfaces to minimize damage, lower attenuation, and improve reflection values. This is followed ...
Johnson, Larry Fiber Optic Test Equipment and Testing Fiber Optic Links - Testing Fiber Optic Links, 2009
In this tutorial we begin by examining the three basic techniques to perform optical loss testing and the need for bi-directional dual wavelength testing. Next, multimode and singlemode testing will be reviewed. This will be followed by a review of how and why to perform basic power level testing of transmitters and receivers and how to document the results for ...
2013 IEEE Alexander Graham Bell Medal
Light Our Future - IEEE Photonics Society
GHTC 2012 Jim Fruchterman Keynote
2013 IEEE Edison Medal
Lighting the Way: Optical Sensors in the Life Sciences
Nanotechnology For Electrical Engineers
ISSCC 2012 - Eli Harari Plenary
IEEE International Conference on Communications
Life Sciences: Surface Enhanced Raman Spectroscopy, and more
No standards are currently tagged "Optical reflection"
Measurements and instrumentation utilizing electrical and electronic techniques.
All aspects of optical guided-wave science, technology, and engineering in the areas of fiber and cable technologies; active and passive guided-wave componentry (light sources, detectors, repeaters, switches, fiber sensors, etc.); integrated optics and optoelectronics; systems and subsystems; new applications; and unique field trials.
Rapid publication of original research relevant to photonics technology. This expanding field emphasizes laser and electro-optic technology, laser physics and systems, applications, and photonic/ lightwave components and applications. The journal offers short, archival publication with minimal delay.
40% devoted to special issues published in J. Quantum Electronics. Other topics: solid-state lasers, fiber lasers, optical diagnostics for semi-conductor manufacturing, and ultraviolet lasers and applications.