Conferences related to Optical fiber testing

Back to Top

2013 81st ARFTG Microwave Measurement Conference (ARFTG)

RF and Microwave Measurement Techniques


2012 OFC Collocated National Fiber Optic Engineers Conference OFC/NFOEC 2012

OFC/NFOEC is the world's leading international conference for optical communications and networking professionals.


2011 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC)

The 2011 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC 2011) will provide a major international forum for exchanging information on research and developments in the theoretical and experimental fields of and Optoelectronics including Millimeter and Nanometer Waves, Microwaves, Antennas, Propagation, Wireless Communication, Fiber Optics, Photonic Networks.

  • 2009 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC)

    The event programming will count, besides the presentation of technical/scientific articles, with talks leaded by featured professionals in Brazil and abroad and with minicourses and topics of current interest, poster sessions, expositions and panels. Considering the actual technology and science scenario in Brazil, it's believed that the event may be of great value to all the professionals in the area and, therefore, is worth's the support of all the public and private institutions which are involved in


2009 International Conference on Biomedical and Pharmaceutical Engineering (ICBPE)

The conference will be a forum for in-depth discussion to promote novel methodologies and cutting-edge solutions to meet the emerging challenges in the biomedical and the pharmaceutical fields.



Periodicals related to Optical fiber testing

Back to Top

Lightwave Technology, Journal of

All aspects of optical guided-wave science, technology, and engineering in the areas of fiber and cable technologies; active and passive guided-wave componentry (light sources, detectors, repeaters, switches, fiber sensors, etc.); integrated optics and optoelectronics; systems and subsystems; new applications; and unique field trials.


Photonics Technology Letters, IEEE

Rapid publication of original research relevant to photonics technology. This expanding field emphasizes laser and electro-optic technology, laser physics and systems, applications, and photonic/ lightwave components and applications. The journal offers short, archival publication with minimal delay.


Selected Topics in Quantum Electronics, IEEE Journal of

40% devoted to special issues published in J. Quantum Electronics. Other topics: solid-state lasers, fiber lasers, optical diagnostics for semi-conductor manufacturing, and ultraviolet lasers and applications.


Sensors Journal, IEEE

The Field of Interest of the IEEE Sensors Journal is the science and applications of sensing phenomena, including theory, design, and application of devices for sensing and transducing physical, chemical, and biological phenomena. The emphasis is on the electronics, physics, biology, and intelligence aspects of sensors and integrated sensor-actuators. (IEEE Guide for Authors) (The fields of interest of the IEEE ...




Xplore Articles related to Optical fiber testing

Back to Top

Advantages of automated fiber-optic termination

Christopher, A.J. Lasers and Electro-Optics Society, 2003. LEOS 2003. The 16th Annual Meeting of the IEEE, 2003

This paper discusses automated manufacturing techniques and equipment that are currently being developed and deployed to address issues associated with manual processes. These systems can take fiber cable and terminations as input and automatically assemble and test completed cables with no reliance on operator technique or skill level.


Influence of fabrication parameters on pulsed x-ray radiation sensitivity of single-mode optical fibers

Girard, S.; Keurinck, J.; Meunier, J.-P.; Ouerdane, Y.; Boukenter, A.; Derep, J.-L.; Azais, B.; Charre, P.; Vie, M. Radiation and Its Effects on Components and Systems, 2003. RADECS 2003. Proceedings of the 7th European Conference on, 2003

First Page of the Article ![](/xploreAssets/images/absImages/01442400.png)


New Inorganic Insulation for 500 C Electric Equipment

Vondracek, C.H.; Croop, E.J. Power Apparatus and Systems, Part III. Transactions of the American Institute of Electrical Engineers, 1958

A new completely inorganic electrical insulation system has been developed which is suitable for use at operating temperatures of 500 C (degrees centigrade). Insulation components such as magnet wire, slot cells, phase insulation, and a potting or impregnating compound were developed and utilized in the construction of a 1/2-horsepower (hp) induction motor. The insulation in this motor operated for more ...


Troubleshooting PON networks effectively with carrier-grade ethernet and WDM-PON

Sanchez, R.; Hernandez, J.; Larrabeiti, D. Communications Magazine, IEEE, 2014

WDM-PONs have recently emerged to provide dedicated and separated point-to- point wavelengths to individual optical network units. In addition, the recently standardized Ethernet OAM capabilities under the IEEE 802.1ag standard and ITU-T Recommendation Y.1731, together with state-of-the-art optical timedomain reflectometry provide new link-layer and physical tools for the effective troubleshooting of WDM-PONs. This article proposes an integrated troubleshooting box (ITB) ...


Biomedical thermometry-a simple fiber optic approach

Grattan, K.T.V.; Khalil, N.; Palmer, A.W. Biomedical Engineering, IEEE Transactions on, 1988

A portable, fluorescence-based fiber-optic thermometer for use in the 30-50 degrees C range has been constructed using inexpensive solid state electronic and optoelectronic components. A novel measurement scheme allows greater noise discrimination to be achieved with such low bandwidth components. The system is described and discussed, and results of its calibration are reported.


More Xplore Articles

Educational Resources on Optical fiber testing

Back to Top

eLearning

Advantages of automated fiber-optic termination

Christopher, A.J. Lasers and Electro-Optics Society, 2003. LEOS 2003. The 16th Annual Meeting of the IEEE, 2003

This paper discusses automated manufacturing techniques and equipment that are currently being developed and deployed to address issues associated with manual processes. These systems can take fiber cable and terminations as input and automatically assemble and test completed cables with no reliance on operator technique or skill level.


Influence of fabrication parameters on pulsed x-ray radiation sensitivity of single-mode optical fibers

Girard, S.; Keurinck, J.; Meunier, J.-P.; Ouerdane, Y.; Boukenter, A.; Derep, J.-L.; Azais, B.; Charre, P.; Vie, M. Radiation and Its Effects on Components and Systems, 2003. RADECS 2003. Proceedings of the 7th European Conference on, 2003

First Page of the Article ![](/xploreAssets/images/absImages/01442400.png)


New Inorganic Insulation for 500 C Electric Equipment

Vondracek, C.H.; Croop, E.J. Power Apparatus and Systems, Part III. Transactions of the American Institute of Electrical Engineers, 1958

A new completely inorganic electrical insulation system has been developed which is suitable for use at operating temperatures of 500 C (degrees centigrade). Insulation components such as magnet wire, slot cells, phase insulation, and a potting or impregnating compound were developed and utilized in the construction of a 1/2-horsepower (hp) induction motor. The insulation in this motor operated for more ...


Troubleshooting PON networks effectively with carrier-grade ethernet and WDM-PON

Sanchez, R.; Hernandez, J.; Larrabeiti, D. Communications Magazine, IEEE, 2014

WDM-PONs have recently emerged to provide dedicated and separated point-to- point wavelengths to individual optical network units. In addition, the recently standardized Ethernet OAM capabilities under the IEEE 802.1ag standard and ITU-T Recommendation Y.1731, together with state-of-the-art optical timedomain reflectometry provide new link-layer and physical tools for the effective troubleshooting of WDM-PONs. This article proposes an integrated troubleshooting box (ITB) ...


Biomedical thermometry-a simple fiber optic approach

Grattan, K.T.V.; Khalil, N.; Palmer, A.W. Biomedical Engineering, IEEE Transactions on, 1988

A portable, fluorescence-based fiber-optic thermometer for use in the 30-50 degrees C range has been constructed using inexpensive solid state electronic and optoelectronic components. A novel measurement scheme allows greater noise discrimination to be achieved with such low bandwidth components. The system is described and discussed, and results of its calibration are reported.


More eLearning Resources

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Optical fiber testing"

IEEE-USA E-Books

No IEEE-USA E-Books are currently tagged "Optical fiber testing"



Standards related to Optical fiber testing

Back to Top

No standards are currently tagged "Optical fiber testing"


Jobs related to Optical fiber testing

Back to Top