Conferences related to On load tap changers

Back to Top

2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science and technology research, development and applications. The list of program topics includes but is not limited to: Measurement Science & Education, Measurement Systems, Measurement Data Acquisition, Measurements of Physical Quantities, and Measurement Applications.

  • 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

    The Conference focuses on all aspects of instrumentation and measurement science and technology research, development and applications. The list of program topics includes but is not limited to MEASUREMENT SCIENCE & EDUCATION, MEASUREMENT SYSTEMS, MEASUREMENT -DATA ACQUISITION, MEASUREMENTS OF PHYSICAL QUANTITIES, and MEASUREMENT APPLICATIONS.

  • 2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

    The conference focuses on research, development and applications in the field of instrumentation and measurement science and technology. The list of program topics includes but is not limited to Fundamentals, Sensors & Transducers, Measurements of Physical Qualities, Measurement Systems, Measurement Applications, Signal & Image Processing, and Industrial Applications.

  • 2011 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

    The Conference focuses on all aspects of instrumentation and measurement science and technology research, development and applications. The list of program topics includes but is not limited to MEASUREMENT SCIENCE & EDUCATION, MEASUREMENT SYSTEMS, MEASUREMENT -DATA ACQUISITION, MEASUREMENTS OF PHYSICAL QUANTITIES, and MEASUREMENT APPLICATIONS.

  • 2010 IEEE Instrumentation & Measurement Technology Conference - I2MTC 2010

    The Conference focuses on all aspects of instrumentation and measurement science and technology research, development and applications. The list of program topics includes but is not limited to MEASUREMENT SCIENCE & EDUCATION, MEASUREMENT SYSTEMS, MEASUREMENT -DATA ACQUISITION, MEASUREMENTS OF PHYSICAL QUANTITIES, and MEASUREMENT APPLICATIONS.

  • 2009 IEEE Instrumentation & Measurement Technology Conference - I2MTC 2009

    The Conference focuses on all aspects of instrumentation and measurement science and technology research, development and applications. The list of program topics includes but is not limited to MEASUREMENT SCIENCE & EDUCATION, MEASUREMENT SYSTEMS, MEASUREMENT-DATA ACQUISITION, MEASUREMENTS OF PHYSICAL QUANTITIES, and MEASUREMENT APPLICATIONS.

  • 2008 IEEE Instrumentation & Measurement Technology Conference - I2MTC 2008

    The conference focuses on all aspects of instrumentation and measurement science and technology - research, development and applications. The list of program topics includes but is not limited to measurement science & education, measurement systems, measurement data acquisition, measurements of physical quantities, and measurement applications.

  • 2007 IEEE Instrumentation & Measurement Technology Conference - IMTC 2007

  • 2006 IEEE Instrumentation & Measurement Technology Conference - IMTC 2006

  • 2005 IEEE Instrumentation & Measurement Technology Conference - IMTC 2005


2012 7th International Power Electronics and Motion Control Conference (IPEMC 2012)

1. Devices, Packaging and System Integration; 2. Power Converter and Their Control; 3. Power Quality Mitigation; 4. Electric Propulsion System; 5. Renewable Energy and Smart Grid Technology.

  • 2009 IEEE 6th International Power Electronics and Motion Control Conference (IPEMC 2009)

    The conference will include regular sessions on major aspects of the theory, analysis, design, and applications of power electronics and motion control, the following catalogs are the preferred, but not limited topics: power semiconductors and system integration, power converters and their control, FACTS and customer power, motor drive and motion control, renewable energy generation, other applications of power electronics.

  • 2006 5th International Power Electronics and Motion Control Conference (IPEMC 2006)


2012 IEEE International Conference on Condition Monitoring and Diagnosis (CMD)

Condition monitoring and diagnosis for power equipments and power systems,power plants, dielectric materials and their aging mechanisms, degradation assessment for power system, application of information and communication technologies for condition monitoring and diagnosis, tropical climate and other related issues including recycling, reuse and mitigation,strategic planning and management for condition monitoring and diagnosis.

  • 2008 International Conference on Condition Monitoring and Diagnosis (CMD)

    Condition Monitoring and Diagnosis for Power Plants Condition Monitoring and Diagnosis of HV Power Apparatus and Power System Electrical, Mechanical, Thermal and Chemical Failure Phenomena Dielectric Materials Aging and Failure Mechanism Advanced Sensing Technologies for Condition Monitoring and Diagnosis Application of Artificial Intelligence for Data Mining and Condition Assessment Applications of Information Technology for Asset Management Strategic Planning and Management for Condition Monitoring


2012 IEEE International Symposium on Electrical Insulation (ISEI)

This conference is directed towards those who develop, test or use electrical insulation in electrical equipment.

  • 2010 IEEE International Symposium on Electrical Insulation (ISEI)

    This conference is directed towards those who develop, test or use electrical insulation in electrical equipment.

  • 2008 IEEE International Symposium on Electrical Insulation (ISEI)

    The symposium is a venue to discuss the development, application, and testing of electrical insulation, usually in high voltage equipment such as tranformers, rotating machines, switchgear and cables. The conference papers are oriented to practical applications, rather than basic research. Topics of special interest to the Symposium include: New insulation materials and processing methods, Novel applications of insulation in equipment, Single and Multiple Stress Aging etc.


2012 International Conference on High Voltage Engineering and Application (ICHVE)

This conference can provide an excellent platform to share knowledge and experiences on high voltage engineering, and present the advices on the construction and maintenance of UHV transmission lines in China.

  • 2010 International Conference on High Voltage Engineering and Application (ICHVE)

    The current demands for a large amount of electrical energy are resulting in new strategies for developing high voltage power systems, transmission lines, substations, and appropriate equipment. In many countries, the new energy strategies require the planning and construction of UHV ac and dc transmission systems. The ICHVE 2010 will provide an excellent opportunity for high voltage engineering scientists, researchers, faculty, industrial representatives and students to share their state-of-the-art rese



Periodicals related to On load tap changers

Back to Top

Power Delivery, IEEE Transactions on

Research, development, design, application, construction, the installation and operation of apparatus, equipment, structures, materials, and systems for the safe, reliable, and economic delivery and control of electric energy for general industrial, commercial, public, and domestic consumption.


Power Systems, IEEE Transactions on

Requirements, planning, analysis, reliability, operation, and economics of electrical generating, transmission, and distribution systems for industrial, commercial, public, and domestic consumption.



Most published Xplore authors for On load tap changers

Back to Top

Xplore Articles related to On load tap changers

Back to Top

Voltage regulation for primary level power networks by virtual voltage coordinated control

Le Fu; B. Pal; B. Cory 2006 IEEE Power Engineering Society General Meeting, 2006

A new voltage control method, namely virtual voltage coordinated control, for transformer on-load tap changer and static compensator is presented. This coordinated control methods consists of two major parts, virtual voltage calculation and bad data detection. The nice properties of conventional tap changer control are preserved by keeping the conventional dead band and time delay mechanism. The capacity of static ...


An investigation into the OLTC effects on voltage collapse

T. X. Zhu; S. K. Tso; K. L. Lo IEEE Transactions on Power Systems, 2000

It is known that following disturbances, on-load tap changers act to restore the load bus voltage and thus restore the load power to near pre-disturbance level. As the system is probably weakened by the contingencies, this will often over-tax existing supplies due to increased losses and reduction in power plant ability, and thus voltage collapse may result. This paper discusses ...


Research and Application in Substation Reactive Power Dynamic Compensation Based on Fuzzy Control

Huai-zhong Chen 2009 Sixth International Conference on Fuzzy Systems and Knowledge Discovery, 2009

On the basis of analysis of the present situation of substation voltage reactive power integrated control and existing problems, this paper puts forward an implementation scheme of substation reactive power fuzzy control system realized based on Siemens PLC. The operation results show that this kind of control idea is feasible and it can effectively reduce the action number of tap ...


Transformer tap changing by data classification using artificial neural network

M. F. Islam; J. Kamruzzaman; G. Lu IEEE PES Power Systems Conference and Exposition, 2004., 2004

Artificial neural network (ANN) can play a vital role in its application to on-load tap changer of distribution transformers since the input variation in practical field is enormous due to continuous changes in the power system conditions and neural network is capable of handling this variation due to its robust generalization capability. In this paper we use the two algorithms, ...


Possible effects of smart grid functions on LTC transformers

E. Tom Jauch 2010 IEEE Rural Electric Power Conference (REPC), 2010

This paper focuses on Load Tap Changer (LTC) transformer duties associated with SMART GRID (SG) Integrated Volt/Var/kW Management (IVVM) functions. Implementation of SG technology, with resultant changes in power systems, may cause increased or excessive tapchanger duties. These duties will be affected by a) the integration of renewable energy sources; b) more precise operational voltage control levels for conservation voltage ...


More Xplore Articles

Educational Resources on On load tap changers

Back to Top

eLearning

Voltage regulation for primary level power networks by virtual voltage coordinated control

Le Fu; B. Pal; B. Cory 2006 IEEE Power Engineering Society General Meeting, 2006

A new voltage control method, namely virtual voltage coordinated control, for transformer on-load tap changer and static compensator is presented. This coordinated control methods consists of two major parts, virtual voltage calculation and bad data detection. The nice properties of conventional tap changer control are preserved by keeping the conventional dead band and time delay mechanism. The capacity of static ...


An investigation into the OLTC effects on voltage collapse

T. X. Zhu; S. K. Tso; K. L. Lo IEEE Transactions on Power Systems, 2000

It is known that following disturbances, on-load tap changers act to restore the load bus voltage and thus restore the load power to near pre-disturbance level. As the system is probably weakened by the contingencies, this will often over-tax existing supplies due to increased losses and reduction in power plant ability, and thus voltage collapse may result. This paper discusses ...


Research and Application in Substation Reactive Power Dynamic Compensation Based on Fuzzy Control

Huai-zhong Chen 2009 Sixth International Conference on Fuzzy Systems and Knowledge Discovery, 2009

On the basis of analysis of the present situation of substation voltage reactive power integrated control and existing problems, this paper puts forward an implementation scheme of substation reactive power fuzzy control system realized based on Siemens PLC. The operation results show that this kind of control idea is feasible and it can effectively reduce the action number of tap ...


Transformer tap changing by data classification using artificial neural network

M. F. Islam; J. Kamruzzaman; G. Lu IEEE PES Power Systems Conference and Exposition, 2004., 2004

Artificial neural network (ANN) can play a vital role in its application to on-load tap changer of distribution transformers since the input variation in practical field is enormous due to continuous changes in the power system conditions and neural network is capable of handling this variation due to its robust generalization capability. In this paper we use the two algorithms, ...


Possible effects of smart grid functions on LTC transformers

E. Tom Jauch 2010 IEEE Rural Electric Power Conference (REPC), 2010

This paper focuses on Load Tap Changer (LTC) transformer duties associated with SMART GRID (SG) Integrated Volt/Var/kW Management (IVVM) functions. Implementation of SG technology, with resultant changes in power systems, may cause increased or excessive tapchanger duties. These duties will be affected by a) the integration of renewable energy sources; b) more precise operational voltage control levels for conservation voltage ...


More eLearning Resources

IEEE-USA E-Books

No IEEE-USA E-Books are currently tagged "On load tap changers"



Standards related to On load tap changers

Back to Top

IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment

This guide applies to mineral oil used in transformers, load tap changers, voltage regulators, reactors, and circuit breakers. The guide discusses the following: a) Analytical tests and their significance for the evaluation of mineral insulating oil. b) The evaluation of new, unused mineral insulating oil before and after filling into equipment. c) Methods of handling and storage of mineral insulating ...


IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers

This guide includes guidelines for the following: insulating oil maintenance and diagnostics, oil reclamation, testing methods for the determination of remaining insulation (paper) life, and upgrades of auxiliary equipment such as bushings, gauges, deenergized tap changers (DETCs), load tap changers (LTCs) (where applicable), and coil reclamping. The goal of this guide is to assist the user in extending the useful ...


IEEE Standard Requirements for Load Tap Changers



Jobs related to On load tap changers

Back to Top