Conferences related to Ignition

Back to Top

2015 IEEE International Conference on Plasma Sciences (ICOPS)

Basic Processes in Fully and Partially Ionized Plasmas; Microwave Generation and Plasma Interactions; Charged Particle Beams and Sources; High Energy Density Plasmas and Applications; Industrial, Commercial, and Medical Plasma Applications; Plasma Diagnostics; Pulsed Power and other Plasma Applications.

  • 2012 IEEE 39th International Conference on Plasma Sciences (ICOPS)

    Fully and partially ionized plasmas, microwave-plasma interaction, charged particle beams and sources; high energy density plasmas and applications, industrial and medical applications of plasmas; plasma diagnostics; pulsed power and other plasma applictions

  • 2011 IEEE 38th International Conference on Plasma Sciences (ICOPS)

    The ICOPS is the state of the art plasma science conference that covers all aspects of the general plasma science and its applications in various research fields.

  • 2010 IEEE 37th International Conference on Plasma Sciences (ICOPS)

  • 2009 IEEE 36th International Conference on Plasma Sciences (ICOPS)

    The conference features an exciting technical program with reports from around the globe about new and innovative developments in the field of pulsed power, plasma science and engineering. Leading researchers gather to explore pulsed power plasmas, basic plasma physics, high-energy-density-plasmas, inertial confinement fusion, magnetic fusion, plasma diagnostics, microwave generation, lighting, micro and nano applications of plasmas, medical applications and plasma processing.

  • 2008 IEEE 35th International Conference on Plasma Sciences (ICOPS)

    The 35th IEEE International Conference on Plasma Science will feature an exciting technical program with reports from around the globe about new and innovative developments in the field of plasma science and engineering: 1. Basic processes in fully and partially ionized plasmas 2. Microwave generation and plasma interactions 3. Charged particle beams and sources 4. High energy density plasmas applications 5. Industrial, commercial and medical plasma applications 6. Plasma diagnostics 7. Pulsed power

  • 2007 IEEE 34th International Conference on Plasma Science (ICOPS)


2013 European Conference on Electrical and Instrumentation Applications in the Petroleum & Chemical Industry (PCIC EUROPE)

The purpose of the annual PCIC Europe conference is the exchange of experience in the practical application of electricity and instrumentation in the petroleum, chemical and pharaceutical industries.


2013 IEEE 11th International Conference on Electronic Measurement & Instruments (ICEMI)

ICEMI is invited authors to submit original papers in any but not limited as following areas: Science Foundation of Instrument and Measurement Innovative Designing of Instrument and Test System Applications on Instrument and Testing Signal & Image Processing Sensor and Non-electric Measurement Communication and Network Test Systems Control Theory and Application Condition Monitoring, Fault Diagnosis and Prediction Other Relevant Theories and Technologies

  • 2011 IEEE 10th International Conference on Electronic Measurement & Instruments (ICEMI)

    ICEMI is the world s premier conference dedicated to the electronic test of devices, boards and systems covering the complete cycle from design verification, test, diagnosis, failure analysis and back to process and design improvement, and is convened every two years. The purpose of the ICEMI is to provide excellent opportunities for scientists, engineers, and participants throughout the world to present the latest research results and to exchange their views or experience.

  • 2009 9th International Conference on Electronic Measurement & Instruments (ICEMI 2009)

    Science Foundation of Instrument and Measurement Instrument, Measurement and Test Technology: Sensing Technology and Transducer Designing of Instrument and Test System Applications on Instrument and Testing: Communication and Network Test Systems Control Theory and Application


2012 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC)

Hydropower Engineering, Thermal Power Engineering, Nuclear Power Engineering, New and Renewable Sources of Energy, Power Transmission and Distribution Techniques, Power Systems Management, Smart Grid, Best Practice.

  • 2011 Asia-Pacific Power and Energy Engineering Conference (APPEEC)

    Hydropower Engineering, Thermal Power Engineering, Nuclear Power Engineering, New and Renewable Sources of Energy, Power Transmission and Distribution Techniques, Power Systems Management, Smart Grid, Best Practice

  • 2010 Asia-Pacific Power and Energy Engineering Conference (APPEEC)

    Hydropower Engineering, Thermal Power Engineering, Nuclear Power Engineering, New and Renewable Sources of Energy, Power Transmission and Distribution Techniques, Power Systems Management, Smart Grid, Best Practice


2012 IEEE Student Conference on Research and Development (SCOReD)

Communication, RF & Microwave, Lasers & Optics, Computing, Control & Robotics, Power&Energy, Electronics, Biomedical Engineering & Science, Circuit, System & Instrumentation, Computational Intelligence, and Humanitarian Technology.

  • 2011 IEEE Student Conference on Research and Development (SCOReD)

    - Automation, Mechatronics & Robotics - Business, Management & Finance in Industries - Computer Applications - Electronics & Circuits - Engineering Education - Engineering Management - Lasers & Optics - Network & Communications Technology - Power & Energy - RF and Microwave - Signal & Image Processing - Women in Engineering

  • 2010 Student Conference on Research and Development (SCOReD)

    A. Communication Communication and Networks Image and Speech Processing Security B. Computing Artificial Intelligence and Fussy Systems Microprocessor Optimization Techniques Soft Computing, Parallel Processing C. Control and Robotics Manufacturing Technology & Management Mechatronics and Sensors Process Control Robotics , Automation and Instrumentation D. Electronics and Circuits Biomedical Consumer and Industrial Electronics Microelectronics, MEMS Te

  • 2009 7th Student Conference on Research and Development (SCOReD)

    All aspects of Electrical Engineering. Technical Tracks: Communication, Computing, Control and Robotics, Electronic and Circuits, Lasers and Optics, Power and Energy, RF and Microwaves, Women in Engineering, Engineering Education

  • 2008 Regional Student Conference on Research and Development (SCOReD)

    All aspects of Electrical Engineering. Technical Tracks: Communication; Computing; Control and Robotics; Electronics and Circuits; Lasers and Optics; Power and Energy; RF and Microwaves; Women in Engineering; Engineering Education.

  • 2007 5th Student Conference on Research and Development (SCOReD)

    Power System, Energy, Communication, Control System, Electronics, Computing


More Conferences

Periodicals related to Ignition

Back to Top

Plasma Science, IEEE Transactions on

Plasma science and engineering, including: magnetofluid dynamics and thermionics; plasma dynamics; gaseous electronics and arc technology; controlled thermonuclear fusion; electron, ion, and plasma sources; space plasmas; high-current relativistic electron beams; laser-plasma interactions; diagnostics; plasma chemistry and colloidal and solid-state plasmas.


Quantum Electronics, IEEE Journal of

Generation, amplification, modulation, detection, waveguiding, or techniques and effects that can affect the propagation characteristics of coherent electromagnetic radiation having submillimeter and shorter wavelengths




Xplore Articles related to Ignition

Back to Top

The output ability promotion of the SG II -Up laser facility

Yanqi Gao; Zhaodong Cao; Xuedong Yang; Weixin Ma; Baoqiang Zhu; Zunqi Lin 2015 11th Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), 2015

The SG- II -Up laser facility is one of the most important high power laser facilities in China. The maximum output of this facility is studied, and it is improved to 8000J from the design point 5000J.


An ignitron contactor for direct press drives

D. L. Pettit; R. Montross Electrical Engineering, 1957

The use of an ignitron contactor panel for direct press drives for large draw presses reduces the impact of shock loading to the motor, gears, keyways, and other mechanical parts of the drive. Maintenance requirements are thereby reduced. These improvements are obtained at a relatively minor additional cost of the initial installation.


Hand-held operational demining system

P. Edenhofer; L. Alawneh 2005 5th International Conference on Antenna Theory and Techniques, 2005

The paper presents selected results from theoretical and experimental investigations concerned with radar backscattering from typical antipersonnel land mines (APL) in the frequency range of about 200 MHz to 8 GHz in order to improve the conventional metal detector demining technology presently still widely in use.


Implosion symmetry and /spl rho/R measurements on the National Ignition Facility from nascent 27/spl rarr/31 MeV tertiary protons

R. D. Petrasso; C. K. Li; M. D. Cable; S. M. Pollaine; S. W. Haan; J. P. Knauer; S. Cremer; C. Verdon; R. L. Kremens IEEE Conference Record - Abstracts. 1996 IEEE International Conference on Plasma Science, 1996

Summary form only given, as follows. Tertiary protons with birth energies from /spl sim/27 MeV to 30.8 MeV will provide important information about implosion dynamics on the National Ignition Facility (NIF), a new initiative in inertial fusion. Three hypothetical implosions are considered in order to determine the utility of tertiary protons for all phases of the NIF: A gas-capsule implosion ...


Characterization of a Microwave-Induced Atmospheric-Pressure Ar&#x2013;N<sub>2</sub> Plasma Pencil

Leo Mendel D. Rosario; H. V. Lee; Emil Penafiel; Henry J. Ramos; Luis Ma T. Bo-ot; Reinhard V. Fischer; Roy B. Tumlos IEEE Transactions on Plasma Science, 2017

A microwave-induced atmospheric-pressure plasma pencil was developed with an Ar-N2 gas mixture supplied to a coaxial transmission line. High-frequency simulation showed sufficient high electric field at the tip of the inner conductor, which resulted to automatic plasma ignition and a stable operation. The dependence of the characteristics of the plasma pencil from Ar and N2 gas flow rates was extensively ...


More Xplore Articles

Educational Resources on Ignition

Back to Top

eLearning

The output ability promotion of the SG II -Up laser facility

Yanqi Gao; Zhaodong Cao; Xuedong Yang; Weixin Ma; Baoqiang Zhu; Zunqi Lin 2015 11th Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), 2015

The SG- II -Up laser facility is one of the most important high power laser facilities in China. The maximum output of this facility is studied, and it is improved to 8000J from the design point 5000J.


An ignitron contactor for direct press drives

D. L. Pettit; R. Montross Electrical Engineering, 1957

The use of an ignitron contactor panel for direct press drives for large draw presses reduces the impact of shock loading to the motor, gears, keyways, and other mechanical parts of the drive. Maintenance requirements are thereby reduced. These improvements are obtained at a relatively minor additional cost of the initial installation.


Hand-held operational demining system

P. Edenhofer; L. Alawneh 2005 5th International Conference on Antenna Theory and Techniques, 2005

The paper presents selected results from theoretical and experimental investigations concerned with radar backscattering from typical antipersonnel land mines (APL) in the frequency range of about 200 MHz to 8 GHz in order to improve the conventional metal detector demining technology presently still widely in use.


Implosion symmetry and /spl rho/R measurements on the National Ignition Facility from nascent 27/spl rarr/31 MeV tertiary protons

R. D. Petrasso; C. K. Li; M. D. Cable; S. M. Pollaine; S. W. Haan; J. P. Knauer; S. Cremer; C. Verdon; R. L. Kremens IEEE Conference Record - Abstracts. 1996 IEEE International Conference on Plasma Science, 1996

Summary form only given, as follows. Tertiary protons with birth energies from /spl sim/27 MeV to 30.8 MeV will provide important information about implosion dynamics on the National Ignition Facility (NIF), a new initiative in inertial fusion. Three hypothetical implosions are considered in order to determine the utility of tertiary protons for all phases of the NIF: A gas-capsule implosion ...


Characterization of a Microwave-Induced Atmospheric-Pressure Ar&#x2013;N<sub>2</sub> Plasma Pencil

Leo Mendel D. Rosario; H. V. Lee; Emil Penafiel; Henry J. Ramos; Luis Ma T. Bo-ot; Reinhard V. Fischer; Roy B. Tumlos IEEE Transactions on Plasma Science, 2017

A microwave-induced atmospheric-pressure plasma pencil was developed with an Ar-N2 gas mixture supplied to a coaxial transmission line. High-frequency simulation showed sufficient high electric field at the tip of the inner conductor, which resulted to automatic plasma ignition and a stable operation. The dependence of the characteristics of the plasma pencil from Ar and N2 gas flow rates was extensively ...


More eLearning Resources

IEEE-USA E-Books

  • Contact Makers and Electrodes

    This chapter contains sections titled: Contact Makers and Electrodes Relays and Contactors Circuit Breakers Arc Quenching Tripping Motor Starters Switches Limit Switches Ignition Breakers and Buzzers Connectors Sliding Contacts Contacts and Electrodes Contact Bounce, Wipe, and Geometry Dry Circuits Arcing and Quenching Fuses Life Other Devices

  • Mixture Requirements

    This chapter contains sections titled: Mixture Requirements for Spark-Ignition Engines, Effect of Fuel-Air Ratio on Exhaust Emissions, Mixture Requirements for Diesel Engines

  • The German Exemplar

    This chapter contains sections titled: The German Chemists, Educational Engineering, Otto and Daimler, The Compression-Ignition Engine, The Politics of Power, German Influence on England

  • The Actual Cycle

    This chapter contains sections titled: The Actual Cycle in Spark-Ignition Engines, Pressure and Temperature Measurements, Quantitative Analysis of Losses in Spark-Ignition Engines, Effect of Operating Variables on the Actual Cycle of Spark-Ignition Engines, The Actual Cycle in Diesel Engines, Illustrative Examples

  • Engine Design III: Valves and Valve Gear. Gears and Auxiliary Systems

    This chapter contains sections titled: Poppet Valves, Valves And Ports for 2-Cycle Engines, Valve-Gear Design, Gearing, Superchargers and Scavenging Pumps, Manifolding, Ignition Systems, Injection Systems, Cooling Systems, Liquid, Cooling Systems, Air, Lubrication Systems, Auxiliaries, Gaskets And Seals, Over-All Design Criteria

  • Carburetor Design and Emission Control for Spark-Ignition Engines

    This chapter contains sections titled: Steady -Flow Carburetion, Transient Carburetion, Complete Automotive Carburetor, Emission Control for Spark- Ignition Engines

  • Gas-turbine starting and control-system principles

    This chapter contains sections titled: 11.1 Starting, 11.2 Ignition systems, 11.3 Safety limits and control of running variables, References

  • Combustion in Spark-Ignition Engines II : Detonation and Preignition

    This chapter contains sections titled: Detonation, Preignition

  • Fuel Injection

    This chapter contains sections titled: Fuel Injection for Diesel Engines, Fuel Injection for Spark-Ignition Engines, Size Effects in Fuel Injection

  • Fuels for Internal-Combustion Engines

    This chapter contains sections titled: Petroleum Fuels, Gaseous Fuels, Nonpetroleum Fuels, Fuels for Spark-Ignition Engines, Detonation Characteristics of Fuels for S-I Engines, Alcohol Fuels, Effect of Fuel Composition on Preignition, Miscellaneous Properties of Fuels for S-I Engines, Effect of Fuel on Power and Efficiency of S-I Engines, Fuels for Diesel Engines, Unconventional Fuels



Standards related to Ignition

Back to Top

No standards are currently tagged "Ignition"