Electromagnetic compatibility and interference
651 resources related to Electromagnetic compatibility and interference
- Topics related to Electromagnetic compatibility and interference
- IEEE Organizations related to Electromagnetic compatibility and interference
- Conferences related to Electromagnetic compatibility and interference
- Periodicals related to Electromagnetic compatibility and interference
- Most published Xplore authors for Electromagnetic compatibility and interference
2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD)
The NSS/MIC offers an outstanding opportunity for scientists and engineers interested in the fields of nuclear science, radiation detection, accelerators, high energy physics and astrophysics, and related software to present their latest developments and ideas. The scientific program provides a comprehensive review of the latest developments in technology and covers a wide range of applications from radiation and accelerator instrumentation, new detector materials, to complex detector systems for physical sciences, and advanced imaging systems for biological and medical research.
2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS 2013)
Power conversion and motor drives in the green energy era.
2013 IEEE International RF and Microwave Conference (RFM)
The conference offers a platform for researchers, scientists and industrials to present research findings in the area of radio frequency and microwave in general, or in other related areas such as antenna, propagation, electromagnetic, radar, wireless, mobile, communication, advanced materials, metamaterials, plasma, terahertz and photonics
During the last fifteen years, the IEEE Workshop SPI has been developed into a forum of exchange on the latest research and developments in the field of interconnect modeling, simulation and measurement at chip, board, and package level.
2012 IEEE International Conference on Automation and Logistics (ICAL)
Automation, logistics, and related areas.
IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.
EMC standards; measurement technology; undesired sources; cable/grounding; filters/shielding; equipment EMC; systems EMC; antennas and propagation; spectrum utilization; electromagnetic pulses; lightning; radiation hazards; and Walsh functions
Fundamental technologies used in the control and conversion of electric power. Topics include dc-to- dc converter design, direct off-line switching power supplies, inverters, controlled rectifiers, control techniques, modeling, analysis and simulation techniques, the application of power circuit components (power semiconductors, magnetics, capacitors), and thermal performance of electronic power systems.
The most highly-cited general interest journal in electrical engineering and computer science, the Proceedings is the best way to stay informed on an exemplary range of topics. This journal also holds the distinction of having the longest useful archival life of any EE or computer related journal in the world! Since 1913, the Proceedings of the IEEE has been the ...
IEEE Signal Processing Magazine is ranked as the number three most-cited journal in Electrical and Electronics Engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This publication features tutorial style papers on signal processing research and applications. The primary means of communication of the society leadership ...
Electromagnetic Compatibility, IEEE Transactions on, 1970
The reception of a nonhomogeneous signal field embedded in a homogeneous noise field, using a simple two-element subtractive array, is studied. For element spacing which is small compared to both the distance to the source and to the center-frequency-wavelength, the signal-to-noise improvement over a single element is shown to be independent of element spacing d, relatively independent of bandwidth and ...
Electromagnetic Compatibility, IEEE Transactions on, 1998
Measurements of conducted and radiated electromagnetic interference (EMI) emission from hard-switched and soft-switched buck, boost, and flyback converters of similar power ratings are presented. Results indicate that EMI emission can be substantially reduced by using a soft-switching technique in power converters. Thus, the soft-switching technique provides a practical and useful solution to reduce EMI emission from switched-mode power circuits. A ...
Electromagnetic Compatibility (EMC EUROPE), 2013 International Symposium on, 2013
This paper describes the activity of Ukrainian State Centre of Radio Frequencies on the frequency planning and spectrum monitoring to provide the electromagnetic compatibility and interference-free work a lot of radio electronic facilities during the UEFA European football championship EURO-2012 in Ukraine.
Electromagnetic Compatibility and Electromagnetic Ecology, 2005. IEEE 6th International Symposium on, 2005
Some new ways of the reduction of coupling between on-board antennas are considered. It is proposed to use for these objective optimized on geometric and electrophysical parameters a magnetodielectric covering, pin structure and spiral monolayer. It is analyzed physical mechanisms, which is underlying of attenuation characteristics of specified structures.
Antennas, Propagation and EM Theory, 2008. ISAPE 2008. 8th International Symposium on, 2008
A major problem of the superheterodyne receivers is their response to the undesired frequencies, such as harmonic, image frequency signal. In this paper, special attention is paid to the image frequency interference. In order to analysis the effect of the image frequency signal to the superheterodyne, a behavioural model of a superheterodyne receiver of altimeter is presented and its electromagnetic ...
E. E. Donaldson; W. R. Free; D. W. Robertson; J. A. Woody Proceedings of the IEEE, 1978
This paper presents a survey of radiated emission and susceptibility measurement methods which can be employed to evaluate the electromagnetic interference (EMI) characteristics of electronic systems. The paper reviews conventional anechoic-chamber and shieldedenclosure-measurement methods, as well as alternate methods which have been developed to circumvent measurement problems associated with radiated measurements in conventional shielded enclosures. Alternative methods presented include hooded ...
Yong Xiao; Shang-li Zhou; Ya-dong Zhang 2008 China International Conference on Electricity Distribution, 2008
In this paper, many kinds of electromagnetic interference radiation sources of power field service terminal are analyzed. When each module of terminal is designed, electromagnetic compatibility is considered, requirements of test standards and the experience of practical solutions in the course of electro magnetic compatibility (EMC) design, some effective methods to restrain electro magnetic interference (EMI), such as surge, electrical ...
J. A. Montoya Southcon/96. Conference Record, 1996
Electromagnetic compatibility (EMC) as with most engineering disciplines can be incorporated in a cost effective manner if thought of early in the design stage of the project. Whether the project is focused on PC board design or large scale facility design, properly applying EMC basic practices as early as possible will minimize the costs and issues associated with having to ...
Thomas E. Baldwin; Gerard T. Capraro IEEE Transactions on Electromagnetic Compatibility, 1980
This paper describes a computerized analysis process (IEMCAP) which may be used to establish and maintain cost-effective interference control throughout the life cycle of systems composed of communications and electronics equipment. The program is capable of both generating system specification limits and maintaining the integrity of the system specification with system modification. The program utilizes MIL-STD-461A1 and MIL-I-6181D EMC specifications ...
R. Monteiro; B. Borges; V. Anunciada Power Electronics Specialists Conference, 2004. PESC 04. 2004 IEEE 35th Annual, 2004
In order to ensure the compatibility between devices, several electromagnetic compatibility (EMC) standards specify the maximum permitted levels of radiated noise. To comply with these standards, hard switching power converters need to use expensive solutions, namely shielding, Filtering techniques and snubbers, because the voltages have low values of rise and fall times. This fact leads into significant harmonic content at ...
No IEEE.tv Videos are currently tagged "Electromagnetic compatibility and interference"
No IEEE-USA E-Books are currently tagged "Electromagnetic compatibility and interference"
This standard provides methods for determining antenna factors of antennas used for radiated emission measurements of electromagnetic interference (EMI) from 9 kHz to 40 GHz. Antennas included are linearly polarized antennas, such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic dipole arrays, hybrid linearly polarized arrays, broadband horns, etc., that are used in measurements governed by ANSI C63.4-2003.1 The ...