Conferences related to IEC

Back to Top

2014 IEEE Electrical Insulation Conference (EIC)

The Electrical Insulation Conference is focused on the practical applications of electrical insulating sytsems and materials (including nanodielectrics), the associated diagnostics and field use as applied to all types of electrical and electronic equipment.

  • 2013 IEEE Electrical Insulation Conference (EIC)

    Held biennially since 1958, the Electrical Insulation Conference is focused on the practical applications of electrical insulating systems and materials (including nanodielectrics), the associated diagnostics, including field use, as applied to all types of electrical and electronic equipment.

  • 2011 Electrical Insulation Conference (EIC) (Formerly EIC/EME)

    The Conference is a venue to discuss the development, application and testing of electrical insulation, usually in high voltage equipment, such as rotating machines, transformers, switchgear, cables, outdoor insulation, live line work, aerospace, and capacitors. Papers are oriented in practical applications, rather than basic research.

  • 2009 IEEE Electrical Insulation Conference (EIC) (Formerly EIC/EME)

    Electrical insulating materrials and systems, their application to all types of electrical and electronic equipment and associated diagnostics.

  • 2007 Electrical Insulation Conference and Electrical Manufacturing Expo (EIC/EME)

  • 2005 Electrical Insulation Conference and Electrical Manufacturing Expo (EIC/EME)


2014 IEEE International Conference on Systems, Man and Cybernetics - SMC

SMC2014 targets advances in Systems Science and Engineering, Human-Machine Systems, and Cybernetics involving state-of-art technologies interacting with humans to provide an enriching experience and thereby improving the quality of lives including theories, methodologies, and emerging applications.


2013 European Conference on Electrical and Instrumentation Applications in the Petroleum & Chemical Industry (PCIC EUROPE)

The purpose of the annual PCIC Europe conference is the exchange of experience in the practical application of electricity and instrumentation in the petroleum, chemical and pharaceutical industries.


2013 IEEE 11th International Conference on Industrial Informatics (INDIN)

The aim of the conference is to bring together researchers and practitioners from industry and academia and provide them with a platform to report on recent developments, deployments, technology trends and research results, as well as initiatives related to industrial informatics and their application.


2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA)

The ETFA conference series is the prime, and largest, IEEE-sponsored event dedicated to factory automation and emerging technologies in industrial automation.The aim of the ETFA conference series is to provide researchers and practitioners from industry and academia with a platform to report on recent developments in the newly emerging areas of technology and their potential applications to factory automation.The technical success of the ETFA conference series also testifies to the rapid evolution of the area of industrial automation in the recent decades. The proceedings of the conference give a fairly accurate picture of the state of the art of the area. ETFA conferences were fortunate to attract high quality papers, many of which were later published in the IEEE Transactions on Industrial Electronics.

  • 2012 IEEE 17th Conference on Emerging Technologies & Factory Automation (ETFA 2012)

    The ETFA conference series is the prime, and largest, IEEE-sponsored event dedicated to factory automation and emerging technologies in industrial automation. The aim of the ETFA conference series is to provide researchers and practitioners with a platform to report on recent developments and their potential applications to factory automation.

  • 2011 IEEE 16th Conference on Emerging Technologies & Factory Automation (ETFA 2011)

    The aim of ETFA conference is to bring together researchers and practitioners from the industry and academia and provide them with a platform to report on recent advances and developments in the newly emerging areas of technology, as well as actual and potential applications to industrial and factory automation

  • 2010 IEEE 15th Conference on Emerging Technologies & Factory Automation (ETFA 2010)

    The aim of the conference is to bring together researchers and practitioners from the industry and academia and provide them with a platform to report on recent advances and developments in the newly emerging areas of technology, as well as actual and potential applications to industrial and factory automation.

  • 2009 IEEE Conference on Emerging Technologies & Factory Automation (ETFA 2009)

    The aim of the conference is to bring together researchers and practitioners from the industry and academia and provide them with a platform to report on recent advances and developments in the newly emerging areas of technology, as well as actual and potential applications to industrial and factory automation.


More Conferences

Periodicals related to IEC

Back to Top

Power Delivery, IEEE Transactions on

Research, development, design, application, construction, the installation and operation of apparatus, equipment, structures, materials, and systems for the safe, reliable, and economic delivery and control of electric energy for general industrial, commercial, public, and domestic consumption.


Systems, Man, and Cybernetics, Part C: Applications and Reviews, IEEE Transactions on

Applications, review, and tutorial papers within the scope of the Systems, Man and Cybernetics Society. Currently, this covers: (1) Integration of the theories of communication, control cybernetics, stochastics, optimization and system structure towards the formulation of a general theory of systems; (2) Development of systems engineering technology including problem definition methods, modeling, and stimulation, methods of systems experimentation, human factors ...




Xplore Articles related to IEC

Back to Top

Single-stage AC-DC converter with PFC based on continuous input current charge-pump topologies

Cícero S. Postiglione; André L. Fuerback; Claudinor B. Nascimento; Arnaldo J. Perin 2009 Brazilian Power Electronics Conference, 2009

This paper presents a single-stage power factor corrected (PFC) AC-DC converter. The topology is based on CIC-CPPFC (continuous input current charge-pump power factor correction) technique, achieving continuous conduction mode (CCM) input current with high power factor by using a coupled inductor, meeting IEC 61000-3-2 regulations for wide load range without additional input filter. Two different switching laws are tested. The ...


Safety considerations for electrical heat tracing

P. Baen; R. Jones; D. Mohla; N. R. Rafferty; L. Robicheaux; C. Sandberg IEEE Industry Applications Magazine, 1996

Since the advent of electrical heat tracing over 50 years ago, many challenges have confronted industry to ensure safe and reliable heat tracing operation. Reliability of heat tracing systems can directly affect safety-related operations, such as fire protection and emergency eyewash and safety showers. As a good practice, the safety of process systems should not be dependent on the performance ...


Analytical Thermal Rating Method for Cables Installed in J-Tubes

R. D. Chippendale; J. A. Pilgrim; K. F. Goddard; P. Cangy IEEE Transactions on Power Delivery, 2017

One possible thermal pinch point along the route of a wind farm export circuit is a J tube, commonly used to provide mechanical protection to cable sections between the sea floor and the offshore platform. Current ratings for such cable sections are not covered by the scope of IEC 60287, while the existing publications covering such systems have limitations. This ...


Probabilistic modeling and optimization of Real-Time Protocol for Multifunction Vehicle Bus

Lifan Su; Min Zhou; Hai Wan; Ming Gu Tsinghua Science and Technology, 2016

In this paper, we present the modeling and optimization of a Real-Time Protocol (RTP) used in Train Communication Networks (TCN). In the proposed RTP, message arbitration is represented by a probabilistic model and the number of arbitration checks is minimized by using the probability of device activity. Our optimized protocol is fully compatible with the original standard and can thus ...


A review of faults detectable by gas-in-oil analysis in transformers

M. Duval IEEE Electrical Insulation Magazine, 2002

IEC Publication 60599 provides a coded list of faults detectable by dissolved gas analysis (DGA): PD = partial discharges; D1 = discharges of low energy; D2 = discharges of high energy; T1 = thermal faults of temperature < 300°C; T2 = thermal faults of temperature 300°C < T < 700°C; T3 = thermal faults of temperature > 700°C. The IEC ...


More Xplore Articles

Educational Resources on IEC

Back to Top

eLearning

Single-stage AC-DC converter with PFC based on continuous input current charge-pump topologies

Cícero S. Postiglione; André L. Fuerback; Claudinor B. Nascimento; Arnaldo J. Perin 2009 Brazilian Power Electronics Conference, 2009

This paper presents a single-stage power factor corrected (PFC) AC-DC converter. The topology is based on CIC-CPPFC (continuous input current charge-pump power factor correction) technique, achieving continuous conduction mode (CCM) input current with high power factor by using a coupled inductor, meeting IEC 61000-3-2 regulations for wide load range without additional input filter. Two different switching laws are tested. The ...


Safety considerations for electrical heat tracing

P. Baen; R. Jones; D. Mohla; N. R. Rafferty; L. Robicheaux; C. Sandberg IEEE Industry Applications Magazine, 1996

Since the advent of electrical heat tracing over 50 years ago, many challenges have confronted industry to ensure safe and reliable heat tracing operation. Reliability of heat tracing systems can directly affect safety-related operations, such as fire protection and emergency eyewash and safety showers. As a good practice, the safety of process systems should not be dependent on the performance ...


Analytical Thermal Rating Method for Cables Installed in J-Tubes

R. D. Chippendale; J. A. Pilgrim; K. F. Goddard; P. Cangy IEEE Transactions on Power Delivery, 2017

One possible thermal pinch point along the route of a wind farm export circuit is a J tube, commonly used to provide mechanical protection to cable sections between the sea floor and the offshore platform. Current ratings for such cable sections are not covered by the scope of IEC 60287, while the existing publications covering such systems have limitations. This ...


Probabilistic modeling and optimization of Real-Time Protocol for Multifunction Vehicle Bus

Lifan Su; Min Zhou; Hai Wan; Ming Gu Tsinghua Science and Technology, 2016

In this paper, we present the modeling and optimization of a Real-Time Protocol (RTP) used in Train Communication Networks (TCN). In the proposed RTP, message arbitration is represented by a probabilistic model and the number of arbitration checks is minimized by using the probability of device activity. Our optimized protocol is fully compatible with the original standard and can thus ...


A review of faults detectable by gas-in-oil analysis in transformers

M. Duval IEEE Electrical Insulation Magazine, 2002

IEC Publication 60599 provides a coded list of faults detectable by dissolved gas analysis (DGA): PD = partial discharges; D1 = discharges of low energy; D2 = discharges of high energy; T1 = thermal faults of temperature < 300°C; T2 = thermal faults of temperature 300°C < T < 700°C; T3 = thermal faults of temperature > 700°C. The IEC ...


More eLearning Resources

IEEE-USA E-Books

  • Application of Ethernet and IEC 61850 Communications

    This chapter contains sections titled: IEC 61850 Protocol Modern IEDs Substation Architecture IEC 61850 Communication Structure Logical Nodes Ethernet Connection Networking Media Network Topologies Application to Arc Flash Relaying and Communications Review Questions References

  • Appendix A: IEC Standards on Power Quality

    No abstract.

  • EMC Measurements

    This chapter introduces the fundamental electromagnetic compatibility (EMC) measuring instrumentation and measurement methods, defined by the International Electrotechnical Commission (IEC), for compliance assessment of commercial products. It describes the essential metrological requirements specified for the EMC measuring instrumentation and test sites, and discusses the relevant methods of verification of such requirements. EMC tests are classified as emission or immunity (susceptibility) tests. Emission and immunity tests are said to be conducted if the disturbance energy is generated in the form of voltage, current, or power. Emission tests are indirect measurements. The building blocks of the quasi-peak measuring receiver, or electromagnetic interference (EMI) receiver, are also discussed in the chapter. Conducted emission tests consist in the measurement of the RF disturbance voltage generated by an equipment under test (EUT) connected to a power outlet. Finally, the chapter considers radiated emission measurements.

  • Appendix O: Miscellaneous

    This chapter contains sections titled: Harmonization of national and international shipbuilding standards NEMA and IEC equipment - mixing and matching installation (refer to IEEE Std 45-2002, 1.7) (typical example) Shipboard underway vibration: recommendations for electric equipment IEEE Std 45-1998, 1.6.1.d, Vibration of vessel underway - electrical equipment IEEE Std 45-2002, 1.5.1, Vibration of vessel underway - electrical equipment (extract)

  • Arc-Resistant Equipment

    This chapter contains sections titled: Calculations of Arc Flash Hazard in Arc-Resistant Equipment Qualifications in IEEE Guide Accessibility Types IEC Accessibility Types Arc-Resistant Ratings Testing According to IEEE Guide Pressure Relief Venting and Plenums Cable Entries Review Questions References

  • Appendix I: Bibliography

    This chapter contains sections titled: List of Regulatory body abbreviations specific to shipbuilding ANSI standards ASTM standards Canadian standards IEC standards IEEE standards Military standards (USA) NEMA standards

  • System Level Testing for ESD Susceptibility

    This chapter provides an overview of system level testing for immunity to electrostatic discharge (ESD), as performed in manufacturing facilities and independent test laboratories. A system is a completed unit, module, or subsystem that may be affected by an ESD event. The purpose of ESD testing electronic and electronically controlled products is to ensure survivability and continued operation of electronic products when exposed to static discharges in the environment. System level ESD testing can be divided into two main areas: testing for compliance and testing for product reliability. The world's most widely used standard for testing systems is IEC 61000-4-2. Contact mode testing is the preferred test method since it eliminates some of the variables that are inherent in air discharge testing. For compliance purposes, ESD testing is performed to all surfaces of a product that are accessible to the operator.

  • Industry Activities

    This chapter contains sections titled: Introduction American National Standards Institute (ANSI) American Society for Testing and Materials (ASTM) Association of Edison Illuminating Companies (AEIC) Edison Electric Institute (EEI) Electric Power Research Institute (EPRI) Electrical Apparatus Service Association (EASA) Electrical Manufacturing and Coil Winding Association (EMCWA) Electronic Industries Association (EIA) Institut De Reserche D'Hydro-Québec (IREQ) The Institute for Interconnecting and Packaging Electronic Circuits (IPC) Institute of Electrical and Electronics Engineers (IEEE) Insulated Cable Engineers Association (ICEA) International Conference on Large High Voltage Electrical Systems (CIGRé) The International Electrotechnical Commission (IEC) National Electrical Manufacturers Association (NEMA) Society of Automotive Engineers (SAE) Society of Plastics Engineers (SPE) Society of the Plastics Industry (SPI) Underwriters Laboratories (UL) Conferences/Symposiums Publications

  • Probabilistic Modeling of Single High-Power Loads

    This chapter contains sections titled: Introduction Deterministic modeling Experimental analog models Frequency domain analytical models Time domain models Probabilistic modeling Numerical analyses Conclusions Appendix: IEC Standard 61000-4-30 - general guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equipment connected thereto References

  • Harmonic Distortion Limits According to Standards

    Many countries have enacted their standards for harmonic limitations. IEC Standard Series 61000 provides internationally accepted information for the control of harmonics and interharmonics. The IEEE 519 standard provides recommended harmonic indices: depth of notches, total notch area, and distortion of bus voltage distorted by commutation notches, low-voltage systems, individual and total current distortion, and individual and total voltage distortion. The point of common coupling (PCC) could be located at the primary or secondary of the supply transformer, depending whether or not multiple customers are supplied from the transformer. IEEE 519 provides for probabilistic applications of harmonic distortion limits. The IEC Standards 61000-3-2 and 61000-2-2 define limits on harmonic current injected into a public distribution network by nonlinear appliances with an input current less than or equal to 16 A.



Standards related to IEC

Back to Top

No standards are currently tagged "IEC"


Jobs related to IEC

Back to Top