Humidity

View this topic in
Humidity is a term for the amount of water vapor in the air, and can refer to any one of several measurements of humidity. (Wikipedia.org)






Conferences related to Humidity

Back to Top

2013 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS)

2013 IEEE NEMS is the 8th annual International Conference on Nano/Micro Engineered and Molecular Systems which started in 2006. It covers Nano science and technology, Micro/nanofluidics and Bio chip, Micro/nano fabrication & metrology, Micro/Nano sensors, actuators and systemd, Flexible MEMS and printed electronics, Carbon Nanotube and Graphene based devices, etc.

  • 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS)

    Nanomaterials; Carbon Nanotube based Devices and Systems; Molecular Sensors, Actuators, and Systems; Nanobiology, Nano-bio-informatics, Nanomedicine; Microfluidics and Nanofluidics;Micro and Nano Heat Transfer.

  • 2011 IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS)

    Nanotechnology is an important emerging field. On the other hand, MEMS is indispensable in spanning nano devices into systems. It is evident that MEMS and Nanotechnology will soon merge together and this marriage will significantly impact many industries across the globe. This conference is the annual IEEE Nanotechnology Council meeting to bring together world-leading researchers in several advanced topics of MEMS and Nanotechnology to disseminate their latest research results and allow cross-disciplinary.

  • 2010 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS)

    Micro and Nano Fabrication Micro/Nano Sensors and Actuators Nanophotonics Nanomaterials Microfluidics and Nanofluidics Micro and Nano Heat Transfer Nanobiology, Nano-bio-informatics, Nanomedicine Nanoscale Robotics, Assembly, and Automation Carbon Nanotube based Devices and Systems Micro/Nanoelectromechanical Systems (M/NEMS) Molecular Sensors, Actuators, and Systems

  • 2009 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS)

    IEEE-NEMS is a premier conference of the IEEE Nanotechnology Council to bring together world-leading researchers in the several focused topics of MEMS and Nanotechnology to disseminate their latest research results and allow cross-disciplinary exchange of knowledge to further advance both technological areas. MEMS is naturally continuing its downsizing into Nanoelectromechanical Systems but at the same time it is indispensable in constructing complete Nano devices and systems. It is foreseeable that MEMS an


2012 10th World Congress on Intelligent Control and Automation (WCICA 2012)

A. Intelligent Control B. Control Theory and Control Engineering C. Complex Systems and Intelligent Robots D. Others


2012 24th Chinese Control and Decision Conference (CCDC)

Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2011 23rd Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2010 Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies

  • 2009 Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.


2012 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC)

Hydropower Engineering, Thermal Power Engineering, Nuclear Power Engineering, New and Renewable Sources of Energy, Power Transmission and Distribution Techniques, Power Systems Management, Smart Grid, Best Practice.

  • 2011 Asia-Pacific Power and Energy Engineering Conference (APPEEC)

    Hydropower Engineering, Thermal Power Engineering, Nuclear Power Engineering, New and Renewable Sources of Energy, Power Transmission and Distribution Techniques, Power Systems Management, Smart Grid, Best Practice

  • 2010 Asia-Pacific Power and Energy Engineering Conference (APPEEC)

    Hydropower Engineering, Thermal Power Engineering, Nuclear Power Engineering, New and Renewable Sources of Energy, Power Transmission and Distribution Techniques, Power Systems Management, Smart Grid, Best Practice


2011 4th IEEE International Conference on Computer Science and Information Technology (ICCSIT 2011)

The conference is an international forum for the presentation of technological advances and research results in the fields of Computer Science and Information Technology. The conference will bring together leading researchers, engineers and scientists in the domain of interest from around the world.


More Conferences

Periodicals related to Humidity

Back to Top

Instrumentation and Measurement, IEEE Transactions on

Measurements and instrumentation utilizing electrical and electronic techniques.


Reliability, IEEE Transactions on

Principles and practices of reliability, maintainability, and product liability pertaining to electrical and electronic equipment.


Sensors Journal, IEEE

The Field of Interest of the IEEE Sensors Journal is the science and applications of sensing phenomena, including theory, design, and application of devices for sensing and transducing physical, chemical, and biological phenomena. The emphasis is on the electronics, physics, biology, and intelligence aspects of sensors and integrated sensor-actuators. (IEEE Guide for Authors) (The fields of interest of the IEEE ...




Xplore Articles related to Humidity

Back to Top

RASPIMON- Smart sensory system for environmental monitoring

Marius Branzila; Constantin Sarmasanu; Spataru Liviu Electrical and Power Engineering (EPE), 2014 International Conference and Exposition on, 2014

The authors propose a system able to monitor environmental parameters like temperature, humidity, CO, CH4, GPL, alcohol, smoke sensor and flammable gases. In the paper is revealed the advantage of using open source hardware and software at low cost and the way how to develop new smart sensors to be future used in application like intelligent buildings. Being portable, the ...


Effect of Non-Uniform Moisture Distribution on the Hygroscopic Swelling Coefficient

Jiang Zhou; Japhet S. Law IEEE Transactions on Components and Packaging Technologies, 2008

The coefficient of hygroscopic swelling is a material property used to measure the volumetric change with moisture absorption under given humidity and temperature conditions. Current hygroscopic swelling characterization techniques use an averaged approach based on the averaged moisture content. However, the moisture distribution is not uniform across the test specimen during measurement. This introduces analysis errors in determining the material ...


Experimental investigation of the governing parameters in the electrospinning of polyethylene oxide solution

Ying Yang; Zhidong Jia; Qiang Li; Zhicheng Guan IEEE Transactions on Dielectrics and Electrical Insulation, 2006

Electrospinning is an old but yet immature process which is now used to form nanoscale polymer fibers. This paper describes the use of SEM and measurements of jet currents to investigate the effects of key parameters on fiber formation during electrospinning of a polyethylene oxide solution (PEO). The ambient humidity and voltage polarity are key factors influencing fiber formation, but ...


Multifunctional integrated sensor in A 2×2 mm epitaxial sealed chip operating in a wireless sensor node

C. L. Roozeboom; V. A. Hong; C. H. Ahn; E. J. Ng; Y. Yang; B. E. Hill; M. A. Hopcroft; B. L. Pruitt 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), 2014

We present multifunctional integrated sensors (abbreviated MFISES) that combine temperature, humidity, pressure, air speed, chemical gas, magnetic, and acceleration sensing on a single 2×2 mm chip. We fabricate MFISES in a wafer scale encapsulation process (called epi-seal) to hermetically seal the sensor functions with moving parts at low vacuum, and then surface micromachine the environmental sensors on top of the ...


Advancements in electrical insulations for fusion devices

M. S. Madhukar; Bradley Morgan; J. K. Walsh; M. W. Hooker 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, 2009

The cyanate ester polymer, CTD 403, is being considered for use as an insulation material in future fusion devices. In this study, the moisture resistance of neat polymer, glass fiber/CTD 403 and copper foil/CTD 403 was studied. The results show that while prolonged exposure to moisture cause property degradation, however, most of the property loss is recovered after drying the ...


More Xplore Articles

Educational Resources on Humidity

Back to Top

eLearning

RASPIMON- Smart sensory system for environmental monitoring

Marius Branzila; Constantin Sarmasanu; Spataru Liviu Electrical and Power Engineering (EPE), 2014 International Conference and Exposition on, 2014

The authors propose a system able to monitor environmental parameters like temperature, humidity, CO, CH4, GPL, alcohol, smoke sensor and flammable gases. In the paper is revealed the advantage of using open source hardware and software at low cost and the way how to develop new smart sensors to be future used in application like intelligent buildings. Being portable, the ...


Effect of Non-Uniform Moisture Distribution on the Hygroscopic Swelling Coefficient

Jiang Zhou; Japhet S. Law IEEE Transactions on Components and Packaging Technologies, 2008

The coefficient of hygroscopic swelling is a material property used to measure the volumetric change with moisture absorption under given humidity and temperature conditions. Current hygroscopic swelling characterization techniques use an averaged approach based on the averaged moisture content. However, the moisture distribution is not uniform across the test specimen during measurement. This introduces analysis errors in determining the material ...


Experimental investigation of the governing parameters in the electrospinning of polyethylene oxide solution

Ying Yang; Zhidong Jia; Qiang Li; Zhicheng Guan IEEE Transactions on Dielectrics and Electrical Insulation, 2006

Electrospinning is an old but yet immature process which is now used to form nanoscale polymer fibers. This paper describes the use of SEM and measurements of jet currents to investigate the effects of key parameters on fiber formation during electrospinning of a polyethylene oxide solution (PEO). The ambient humidity and voltage polarity are key factors influencing fiber formation, but ...


Multifunctional integrated sensor in A 2×2 mm epitaxial sealed chip operating in a wireless sensor node

C. L. Roozeboom; V. A. Hong; C. H. Ahn; E. J. Ng; Y. Yang; B. E. Hill; M. A. Hopcroft; B. L. Pruitt 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), 2014

We present multifunctional integrated sensors (abbreviated MFISES) that combine temperature, humidity, pressure, air speed, chemical gas, magnetic, and acceleration sensing on a single 2×2 mm chip. We fabricate MFISES in a wafer scale encapsulation process (called epi-seal) to hermetically seal the sensor functions with moving parts at low vacuum, and then surface micromachine the environmental sensors on top of the ...


Advancements in electrical insulations for fusion devices

M. S. Madhukar; Bradley Morgan; J. K. Walsh; M. W. Hooker 2009 23rd IEEE/NPSS Symposium on Fusion Engineering, 2009

The cyanate ester polymer, CTD 403, is being considered for use as an insulation material in future fusion devices. In this study, the moisture resistance of neat polymer, glass fiber/CTD 403 and copper foil/CTD 403 was studied. The results show that while prolonged exposure to moisture cause property degradation, however, most of the property loss is recovered after drying the ...


More eLearning Resources

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Humidity"

IEEE-USA E-Books

No IEEE-USA E-Books are currently tagged "Humidity"



Standards related to Humidity

Back to Top

No standards are currently tagged "Humidity"