Conferences related to Dc Power Conversion

Back to Top

2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014

APEC focuses on the practical and applied aspects of the power electronics business. The conference addresses issues of immediate and long term inportance to the participating power electronics engineer.


IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society

Applications of power electronics, artificial intelligence, robotics, and nanotechnology in electrification of automotive, military, biomedical, and utility industries.

  • IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society

    Industrial and manufacturing theory and applications of electronics, controls, communications, instrumentation and computational intelligence.

  • IECON 2012 - 38th Annual Conference of IEEE Industrial Electronics

    The conference will be focusing on industrial and manufacturing theory and applications of electronics,power, sustainable development, controls, communications, instrumentation and computational intelligence.

  • IECON 2011 - 37th Annual Conference of IEEE Industrial Electronics

    industrial applications of electronics, control, robotics, signal processing, computational and artificial intelligence, sensors and actuators, instrumentation electronics, computer networks, internet and multimedia technologies.

  • IECON 2010 - 36th Annual Conference of IEEE Industrial Electronics

    IECON is an international conference on industrial applications of electronics, control, robotics, signal processing, computational and artificial intelligence, sensors and actuators, instrumentation electronics, computer networks, internet and multimedia technologies. The objectives of the conference are to provide high quality research and professional interactions for the advancement of science, technology, and fellowship.

  • IECON 2009 - 35th Annual Conference of IEEE Industrial Electronics

    Applications of electronics, instrumentation, control and computational intelligence to industrial and manufacturing systems and process. Major themes include power electronics, drives, sensors, actuators, signal processing, motion control, robotics, mechatronics, factory and building automation, and informatics. Emerging technologies and applications such as renewable energy, electronics reuse, and education.

  • IECON 2008 - 34th Annual Conference of IEEE Industrial Electronics

    Applications of electronics, instrumentation, control and computational intelligence to industrial and manufacturing systems and process. Major themes include power electronics, drives, sensors, actuators, signal processing, motion control, robotics, mechatronics, factory and building automation, and informatics. Emerging technologies and applications such as renewable energy, electronics reuse, and education. Conference will be held

  • IECON 2007 - 33rd Annual Conference of IEEE Industrial Electronics

    IECON'07 is an international conference on industrial applications of electronics, control, robotics, signal processing, computational and artificial intelligence, sensors and actuators, instrumentation electronics, computer networks, internet and multimedia technologies. The objectives of the conference are to provide high quality research and professional interactions for the advancement of science, technology and fellowship.


INTELEC 2014 - 2014 IEEE International Telecommunications Energy Conference

An international conference for users, designers, and manufacturers of communications energy systems for: Wireline and Wireless systems, Data/Internet systems, Video systems, SATCOM, CATV, VOIP, Unified Communications systems, WiFi, Data Centers, Energy Storage, Renewable Energy, and Smart Grid Systems.

  • INTELEC 2013 - 2013 IEEE International Telecommunications Energy Conference

    INTELEC®‚ is an international forum for the exchange of information on energy and power for communication systems including IP and multimedia applications both today and in the future. The conference provides a unique opportunity for designers, manufacturers, distributors of power equipment and network operators to interact directly with researchers and users to discuss a wide variety of topics of power systems, components and energy storage technologies, exchange operational experience and other related energy topics.

  • INTELEC 2012 - 2012 IEEE International Telecommunications Energy Conference

    INTELEC is an international assembly and forum for the exchange of ideas, information and new developments in energy systems for communications. This conference provides a unique opportunity for network operators and developers to interact directly with designers, manufacturers and distributors of communications energy systems, and related components and products.

  • INTELEC 2011 - 2011 33rd International Telecommunications Energy Conference

    Power Conversion Power Plants for Telecommunication and Data Centres Telecommunications Power Systems Wireless Energy Transfer Power Harvesting Uninterruptable Power Supplies Batteries Modelling and Simulation Smart Grids Energy Storage Alternative Power Sustainable Energy Prime Power Systems Power Technology, Architectures, Management Maintenance Solutions for Power Systems & Cooling Physical and Thermal Design

  • INTELEC 2010 - 2010 IEEE International Telecommunications Energy Conference

    Internatiional Telecom Energy Conference will focus on energy issues facing power users in the 21st century. Alternative methods of powering telecommunications networks will be explored.

  • INTELEC 2009 - 2009 International Telecommunications Energy Conference

    1) Power Conversion (AC, DC, UPS) 2) Energy Management & Storage 3) Power System Architecture 4) Disaster Recovery & Safety 5) Renewable Energy & System 6) Distributed & Micro-Grid System 7) Physical & Thermal Design 8) Earthing, Grounding & Bounding 9) Electromagnetic Compatibility (EMI & EMC) 10) Code & Standards 11) Cable System Operation, Administration & Maintenance 12) Electric Machine & Drives 13) Diagnostic & Monitoring System

  • INTELEC 2008 - 2008 IEEE International Telecommunications Energy Conference

    Telecom energy systems and related products.


2013 IEEE Grenoble PowerTech

PowerTech is the anchor conference of the IEEE Power & Energy Society in Europe. It is intended to provide a forum for electric power engineering scientists and engineers to share ideas, results of their scientific work, to learn from each other as well as to establish new friendships and maintain existing ones.

  • 2011 IEEE Trondheim PowerTech

    PowerTech is the anchor conference of the IEEE Power & Energy Society in Europe. It is intended to provide a forum for electric power engineering scientists and engineers to share ideas, results of their scientific work and to learn from each other.

  • 2009 IEEE Bucharest Power Tech

    PowerTech is the anchor conference of the IEEE-PES in Europe. It is intended to provide a forum for scientists and engineers interested in electric power engineering to share ideas, results of their scientific work, to learn from each other as well as to establish new friendships and rekindle existing ones.


2010 12th International Power Electronics Congress (CIEP)

CIEP2010 is focused on original papers in all the areas of Power Electronics, including: Motor drives and motor control; simulation, modeling and analysis; DC-DC converters; industrial electronics; electronic ballasts; control theory applied to power electronics; power semiconductors devices; power quality; fault diagnosis in power electronics and other related topics.


More Conferences

Periodicals related to Dc Power Conversion

Back to Top

Industrial Electronics, IEEE Transactions on

Theory and applications of industrial electronics and control instrumentation science and engineering, including microprocessor control systems, high-power controls, process control, programmable controllers, numerical and program control systems, flow meters, and identification systems.


Plasma Science, IEEE Transactions on

Plasma science and engineering, including: magnetofluid dynamics and thermionics; plasma dynamics; gaseous electronics and arc technology; controlled thermonuclear fusion; electron, ion, and plasma sources; space plasmas; high-current relativistic electron beams; laser-plasma interactions; diagnostics; plasma chemistry and colloidal and solid-state plasmas.


Power Delivery, IEEE Transactions on

Research, development, design, application, construction, the installation and operation of apparatus, equipment, structures, materials, and systems for the safe, reliable, and economic delivery and control of electric energy for general industrial, commercial, public, and domestic consumption.


Power Electronics, IEEE Transactions on

Fundamental technologies used in the control and conversion of electric power. Topics include dc-to- dc converter design, direct off-line switching power supplies, inverters, controlled rectifiers, control techniques, modeling, analysis and simulation techniques, the application of power circuit components (power semiconductors, magnetics, capacitors), and thermal performance of electronic power systems.


Proceedings of the IEEE

The most highly-cited general interest journal in electrical engineering and computer science, the Proceedings is the best way to stay informed on an exemplary range of topics. This journal also holds the distinction of having the longest useful archival life of any EE or computer related journal in the world! Since 1913, the Proceedings of the IEEE has been the ...



Most published Xplore authors for Dc Power Conversion

Back to Top

Xplore Articles related to Dc Power Conversion

Back to Top

Design of reactors for single-winding constant on-time and constant off-time DC-to-DC converters operating in the discontinuous mode

Dan Chen; H. Owen; T. Wilson; T. Wilson IEEE Transactions on Magnetics, 1981

An algorithm and equations are developed for designing reactors for dc-to-dc converters operating in the discontinuous mode for three types of converters regulated by constant on-time and constant off-time feedback controllers. A numerical design example is also given to illustrate the use of the algorithm and the design equations.


A Comparative Study of Fuel-Cell–Battery, Fuel-Cell–Ultracapacitor, and Fuel-Cell–Battery–Ultracapacitor Vehicles

Jennifer Bauman; Mehrdad Kazerani IEEE Transactions on Vehicular Technology, 2008

Although many researchers have investigated the use of different powertrain topologies, component sizes, and control strategies in fuel-cell vehicles, a detailed parametric study of the vehicle types must be conducted before a fair comparison of fuel-cell vehicle types can be performed. This paper compares the near-optimal configurations for three topologies of vehicles: fuel-cell- battery, fuel-cell-ultracapacitor, and fuel-cell-battery-ultracapacitor. The objective function ...


A Comparison Between the GPI and PID Controllers for the Stabilization of a DC–DC “Buck” Converter: A Field Programmable Gate Array Implementation

Eric William Zurita-Bustamante; Jesú s Linares-Flores; Enrique Guzman-Ramirez; Hebertt Sira-Ramirez IEEE Transactions on Industrial Electronics, 2011

This paper presents a comparison between two stabilizing average output feedback controllers implemented on a field programmable gate array (FPGA) facility. A generalized proportional integral (GPI) controller and a proportional integral derivative (PID) controller are implemented using an FPGA, and their respective performances are duly compared. The GPI controller is found to present a better dynamic response than the PID ...


Multiphase Interleaved Converter for Lithium Battery Active Balancing

Fabien Mestrallet; Lyubomir Kerachev; Jean-Christophe Crebier; Alexandre Collet IEEE Transactions on Power Electronics, 2014

In this paper, an innovative any cell(s) to any cell(s) active balancing converter for lithium battery stack management is presented. Based on multiphase converter legs connected to each lithium battery potential, it is able to transfer energy from any cell(s) to any cell(s). First, a basic "natural" balancing control strategy is presented. Then, based on the perspective of a high ...


Analysis and Design of a New AC–DC Single-Stage Full-Bridge PWM Converter With Two Controllers

Pritam Das; Majid Pahlevaninezhad; Gerry Moschopoulos IEEE Transactions on Industrial Electronics, 2013

Single-phase power factor correction (PFC) ac-dc converters are widely used in the industry for ac-dc power conversion from single phase ac-mains to an isolated output dc voltage. Typically, for high-power applications, such converters use an ac-dc boost input converter followed by a dc-dc full-bridge converter. A new ac-dc single-stage high-power universal PFC ac input full- bridge, pulse-width modulated converter is ...


More Xplore Articles

Educational Resources on Dc Power Conversion

Back to Top

eLearning

Design of reactors for single-winding constant on-time and constant off-time DC-to-DC converters operating in the discontinuous mode

Dan Chen; H. Owen; T. Wilson; T. Wilson IEEE Transactions on Magnetics, 1981

An algorithm and equations are developed for designing reactors for dc-to-dc converters operating in the discontinuous mode for three types of converters regulated by constant on-time and constant off-time feedback controllers. A numerical design example is also given to illustrate the use of the algorithm and the design equations.


A Comparative Study of Fuel-Cell–Battery, Fuel-Cell–Ultracapacitor, and Fuel-Cell–Battery–Ultracapacitor Vehicles

Jennifer Bauman; Mehrdad Kazerani IEEE Transactions on Vehicular Technology, 2008

Although many researchers have investigated the use of different powertrain topologies, component sizes, and control strategies in fuel-cell vehicles, a detailed parametric study of the vehicle types must be conducted before a fair comparison of fuel-cell vehicle types can be performed. This paper compares the near-optimal configurations for three topologies of vehicles: fuel-cell- battery, fuel-cell-ultracapacitor, and fuel-cell-battery-ultracapacitor. The objective function ...


A Comparison Between the GPI and PID Controllers for the Stabilization of a DC–DC “Buck” Converter: A Field Programmable Gate Array Implementation

Eric William Zurita-Bustamante; Jesú s Linares-Flores; Enrique Guzman-Ramirez; Hebertt Sira-Ramirez IEEE Transactions on Industrial Electronics, 2011

This paper presents a comparison between two stabilizing average output feedback controllers implemented on a field programmable gate array (FPGA) facility. A generalized proportional integral (GPI) controller and a proportional integral derivative (PID) controller are implemented using an FPGA, and their respective performances are duly compared. The GPI controller is found to present a better dynamic response than the PID ...


Multiphase Interleaved Converter for Lithium Battery Active Balancing

Fabien Mestrallet; Lyubomir Kerachev; Jean-Christophe Crebier; Alexandre Collet IEEE Transactions on Power Electronics, 2014

In this paper, an innovative any cell(s) to any cell(s) active balancing converter for lithium battery stack management is presented. Based on multiphase converter legs connected to each lithium battery potential, it is able to transfer energy from any cell(s) to any cell(s). First, a basic "natural" balancing control strategy is presented. Then, based on the perspective of a high ...


Analysis and Design of a New AC–DC Single-Stage Full-Bridge PWM Converter With Two Controllers

Pritam Das; Majid Pahlevaninezhad; Gerry Moschopoulos IEEE Transactions on Industrial Electronics, 2013

Single-phase power factor correction (PFC) ac-dc converters are widely used in the industry for ac-dc power conversion from single phase ac-mains to an isolated output dc voltage. Typically, for high-power applications, such converters use an ac-dc boost input converter followed by a dc-dc full-bridge converter. A new ac-dc single-stage high-power universal PFC ac input full- bridge, pulse-width modulated converter is ...


More eLearning Resources

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Dc Power Conversion"

IEEE-USA E-Books

  • The New Frontier in Electronic System Design

    This chapter contains sections titled: The Clocking Challenges in Reality Flying-Adder and Its Three Major Application Areas Flying-Adder for On-chip Frequency Generation Flying-Adder as Adaptive Clock Generator Flying-Adder as On-chip VCXO Flying-Adder for Frame Rate Synchronization and Display Monitor Accommodation Flying-Adder for Frequency Synchronization in Digital Communication: A Preview Flying-Adder for Clock Data Recovery Flying-Adder DLL for Deskew Flying-Adder for Digital Frequency-Locked Loop (Flying-Adder DFLL) Flying-Adder for Digital Phase-Locked Loop (Flying-Adder DPLL) Flying-Adder Technology for Dynamic Frequency Scaling Flying-Adder as 1-bit DDFS Flying-Adder for Spread Spectrum Clocking Flying-Adder for Driving Sampling System Flying-Adder for Non-uniform Sampling Flying-Adder as Digital FSK Modulator Flying-Adder for PWM/PFW DC-DC Power Conversion Integrate Clocking Chips into Processing Chips Bibliography

  • Current Mode Control  -  Functional Basics and Classical Analysis

    This chapter contains sections titled: Current Mode Control Basics Classical Analysis and Control Design Procedures Closed-Loop Performance of Peak Current Mode Control Current Mode Control for Boost and Buck/Boost Converters Summary

  • Current Mode Control  -  Sampling Effects and New Control Design Procedures

    This chapter contains sections titled: Sampling Effects of Current Mode Control Expressions for s-Domain Model for Current Mode Control New Control Design Procedures for Current Mode Control Off-Line Flyback Converter with Optocoupler-Isolated Current Mode Control Summary

  • Interface DC-DC Converters

    In this chapter, interface dc-dc converters for ultra-capacitor energy storage applications are discussed. The background of dc-dc power conversion is given and different converter concepts and topologies are briefly compared. Topology selection process and guideline are given. The theoretical background of two- cell interleaved dc-dc converters is given. The operating principle is described in detail. The analysis is then extended to a general N-cell interleaved dc-dc interface converter. The converter's main parameters, such as the output current ripple and the dc bus current ripple, are analyzed and the solution is given as closed form equations. To give practical value to this chapter, the converter design procedure is discussed in great detail. The design and selection of passive components, such as the output filter inductor and coupling transformer (ICT), the dc bus capacitor and output filter capacitor, are described step by step. The selection process of power semiconductors is also addressed step by step. At the end of the chapter, thermal management of power converters is discussed in general. The origin of the conversion losses and the loss mechanisms in power semiconductors, transformers, inductors, and capacitors is fully addressed. With the theoretical analysis, practical examples, and exercises presented, this chapter gives a clear overview of how to select and design an interface dc-dc converter for ultra-capacitor energy storage applications.

  • Dynamic Performance of PWM Dc-to-Dc Converters

    This chapter contains sections titled: Stability Frequency-Domain Performance Criteria Time-Domain Performance Criteria Stability of Dc-to-Dc Converters Nyquist Criterion Relative Stability: Gain Margin and Phase Margin Summary

  • Index

    No Abstract.

  • PWM Dc-to-Dc Power Conversion

    This chapter contains sections titled: PWM Dc-to-Dc Power Conversion Dc-to-Dc Power Conversion System Features and Issues of PWM Dc-to-Dc Converter Chapter Highlights

  • Practical Considerations in Modeling, Analysis, and Design of PWM Converters

    This chapter contains sections titled: Generalization of PWM Converter Model Design and Analysis of Dc-to-Dc Converters with Practical Source System Consideration for Non-Resistive Load Summary

  • Power Stage Transfer Functions

    This chapter contains sections titled: Bode Plot for Transfer Functions Power Stage Transfer Functions of Buck Converter Power Stage Transfer Functions of Boost Converter Power Stage Transfer Functions of Buck/Boost Converter Empirical Methods for Small-Signal Analysis Summary

  • Front Matter

    The prelims comprise: Half Title Editorial Board Title Copyright Dedication Preface Contents in Brief Contents



Standards related to Dc Power Conversion

Back to Top

No standards are currently tagged "Dc Power Conversion"


Jobs related to Dc Power Conversion

Back to Top