Conferences related to Rail Passenger Vehicles

Back to Top

2017 13th IEEE International Conference on Electronic Measurement & Instruments (ICEMI)

The international conference on electronic measurement & instruments (ICEMI) is sponsored by IEEE Beijing Section and China Instrument and Control Society and held every two years. ICEMI dedicated to the electronic test of devices, modules and systems which is covering the complete cycle from design verification, test, diagnosis, failure analysis and back to process and design improvement. The purpose of the ICEMI is to provide excellent opportunities for scientists, engineers, and participants throughout the world to present the latest research results and to exchange their views or experience.

  • 2015 12th IEEE International Conference on Electronic Measurement & Instruments (ICEMI)

    Conference Scope:The International Conference on Electronic Measurement & Instruments(ICEMI)is sponsored by IEEE and Chinese Institute of Electronics and held every two years. As the world’s premier conference, ICEMI dedicated to the electronic test of devices, modules and systems which is covering the complete cycle from design verification, test, diagnosis, failure analysis and back to process and design improvement. The purpose of the ICEMI is to provide excellent opportunities for scientists, engineers, and participants throughout the world to present the latest research results and to exchange their views or experience.

  • 2013 IEEE 11th International Conference on Electronic Measurement & Instruments (ICEMI)

    ICEMI is invited authors to submit original papers in any but not limited as following areas: Science Foundation of Instrument and Measurement Innovative Designing of Instrument and Test System Applications on Instrument and Testing Signal & Image Processing Sensor and Non-electric Measurement Communication and Network Test Systems Control Theory and Application Condition Monitoring, Fault Diagnosis and Prediction Other Relevant Theories and Technologies

  • 2011 IEEE 10th International Conference on Electronic Measurement & Instruments (ICEMI)

    ICEMI is the world s premier conference dedicated to the electronic test of devices, boards and systems covering the complete cycle from design verification, test, diagnosis, failure analysis and back to process and design improvement, and is convened every two years. The purpose of the ICEMI is to provide excellent opportunities for scientists, engineers, and participants throughout the world to present the latest research results and to exchange their views or experience.

  • 2009 9th International Conference on Electronic Measurement & Instruments (ICEMI 2009)

    Science Foundation of Instrument and Measurement Instrument, Measurement and Test Technology: Sensing Technology and Transducer Designing of Instrument and Test System Applications on Instrument and Testing: Communication and Network Test Systems Control Theory and Application

  • 2007 8th International Conference on Electronic Measurement & Instruments (ICEMI 2007)


2017 17th International Conference on Control, Automation and Systems (ICCAS)

Control Theory and Applications,Control Devices and Instruments,Industrial Applications of Control,Sensors and Signal Processing,Artificial Intelligent Systems,Autonomous Vehicle Systems, Navigation, Guidance and Control,Biomedical Instruments and Systems,Information and Networking,Multimedia Systems,Process Control Systems,Civil and Urban Control Systems Human Robot Interaction,Robot Mechanism and Control,Robot Vision,Exoskeletal Robot,Intelligent Robot and Service Robot,Robotic Applications


2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for the smarter grid, energy efficiency, technologies for sustainable energy systems, converters and power supplies


2017 20th International Conference on Electrical Machines and Systems (ICEMS)

This conference aims to provide a forum for researchers, scientists, and engineers to present their latest R&D achievements and to exchange useful information and experiences in the field of electrical machines and systems, including electrical machines of all types and all aspects (such as new structures, materials, and analysis and design methods), power electronic converters, motion control, electrical drive, and application systems, as well as other relevant areas.


2017 22nd International Conference on Methods and Models in Automation and Robotics (MMAR)

New theoretical and technological developments in: predictive control, robust and adaptive control, networked control systems, fuzzy logic, neural networks and intelligent control, modelling and identification, discrete events and hybrid systems, fault detection, diagnosis, fault tolerant control, computer aided control systems design, mathematical foundations of robotics, motion planning and algorithms, human-robot interaction.


More Conferences

Periodicals related to Rail Passenger Vehicles

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Industry Applications, IEEE Transactions on

The development and application of electric systems, apparatus, devices, and controls to the processes and equipment of industry and commerce; the promotion of safe, reliable, and economic installations; the encouragement of energy conservation; the creation of voluntary engineering standards and recommended practices.


Instrumentation & Measurement Magazine, IEEE

Applications-oriented material in the field of instrumentation and measurement.


Intelligent Systems, IEEE

IEEE Intelligent Systems, a bimonthly publication of the IEEE Computer Society, provides peer-reviewed, cutting-edge articles on the theory and applications of systems that perceive, reason, learn, and act intelligently. The editorial staff collaborates with authors to produce technically accurate, timely, useful, and readable articles as part of a consistent and consistently valuable editorial product. The magazine serves software engineers, systems ...


More Periodicals

Most published Xplore authors for Rail Passenger Vehicles

Back to Top

Xplore Articles related to Rail Passenger Vehicles

Back to Top

Design considerations for static auxiliary supplies

D. R. Kesall IEE Colloquium on Auxiliary Power Supplies for Rolling Stock, 1992

On rail passenger vehicles, a variety of electrical equipment is fitted to provide the appropriate level of facilities and comfort for the user. Static inverters are now the accepted means for deriving supplies compatible with the demands of these auxiliary loads. The modern auxiliary power converter has to satisfy the requirement for low cost, low weight, compact equipment with the ...


Developing IEEE rail transit vehicle standards

T. J. McGean Proceedings of the 1998 ASME/IEEE Joint Railroad Conference, 1998

Sponsored by the Transportation Cooperative Research Program (TCRP), project TCRP G-4, Developing Standards for System and Subsystem Interfaces in Electric Rail Passenger Vehicles, was initiated in January, 1996. Its objective was to design a process for developing consensus standards for system and subsystem interfaces for light rail, heavy rail, and commuter rail vehicles and use the process to produce one ...


Progress developing standards for system and subsystem interfaces in rail passenger vehicles

T. J. McGean Proceedings of the 1997 IEEE/ASME Joint Railroad Conference, 1997

The Transportation Cooperative Research Program (TCRP) is sponsoring a two phase project whose objective is to design a process for developing consensus standards (physical, logical and electrical) for system and subsystem interfaces for elements of electric rail passenger vehicles (light rail, heavy rail and commuter rail vehicles). Using the process, one or more standards will be produced. Under Phase I, ...


Modeling, Simulation, and Testing of Switching Surge Transients in Rapid Transit Vehicles DC Power Systems

Maxime Berger; Jean-Pierre Magalhaes; Carl Lavertu; Ilhan Kocar; Jean Mahseredjian; Daniele Ferrara IEEE Transactions on Industry Applications, 2017

During the operation of dc rapid transit systems, the rail passenger vehicles are subjected to surge transient events that can damage the on-board equipment, and cause service interruption. During the testing phase, vehicle manufacturers must demonstrate the performance of the vehicles under the specified transients. However, system testing is generally not available during design. Engineering analysis must be performed to ...


IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles

IEEE Std 1568-2003, 2003

First Page of the Article ![](/xploreAssets/images/absImages/01257920.png)


More Xplore Articles

Educational Resources on Rail Passenger Vehicles

Back to Top

eLearning

Design considerations for static auxiliary supplies

D. R. Kesall IEE Colloquium on Auxiliary Power Supplies for Rolling Stock, 1992

On rail passenger vehicles, a variety of electrical equipment is fitted to provide the appropriate level of facilities and comfort for the user. Static inverters are now the accepted means for deriving supplies compatible with the demands of these auxiliary loads. The modern auxiliary power converter has to satisfy the requirement for low cost, low weight, compact equipment with the ...


Developing IEEE rail transit vehicle standards

T. J. McGean Proceedings of the 1998 ASME/IEEE Joint Railroad Conference, 1998

Sponsored by the Transportation Cooperative Research Program (TCRP), project TCRP G-4, Developing Standards for System and Subsystem Interfaces in Electric Rail Passenger Vehicles, was initiated in January, 1996. Its objective was to design a process for developing consensus standards for system and subsystem interfaces for light rail, heavy rail, and commuter rail vehicles and use the process to produce one ...


Progress developing standards for system and subsystem interfaces in rail passenger vehicles

T. J. McGean Proceedings of the 1997 IEEE/ASME Joint Railroad Conference, 1997

The Transportation Cooperative Research Program (TCRP) is sponsoring a two phase project whose objective is to design a process for developing consensus standards (physical, logical and electrical) for system and subsystem interfaces for elements of electric rail passenger vehicles (light rail, heavy rail and commuter rail vehicles). Using the process, one or more standards will be produced. Under Phase I, ...


Modeling, Simulation, and Testing of Switching Surge Transients in Rapid Transit Vehicles DC Power Systems

Maxime Berger; Jean-Pierre Magalhaes; Carl Lavertu; Ilhan Kocar; Jean Mahseredjian; Daniele Ferrara IEEE Transactions on Industry Applications, 2017

During the operation of dc rapid transit systems, the rail passenger vehicles are subjected to surge transient events that can damage the on-board equipment, and cause service interruption. During the testing phase, vehicle manufacturers must demonstrate the performance of the vehicles under the specified transients. However, system testing is generally not available during design. Engineering analysis must be performed to ...


IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles

IEEE Std 1568-2003, 2003

First Page of the Article ![](/xploreAssets/images/absImages/01257920.png)


More eLearning Resources

IEEE-USA E-Books

No IEEE-USA E-Books are currently tagged "Rail Passenger Vehicles"



Standards related to Rail Passenger Vehicles

Back to Top

IEEE Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional Allocations

This recommended practice establishes a preferred system design and functional allocation for CBTC systems.


IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles

This recommended practice describes methods for electrical sizing of nickel-cadmium batteries for application on rail passenger vehicles used for battery back-up of low voltage dc auxiliary power systems. It encompasses various factors that govern the electrical size of the battery including but not limited to number of cells, rated capacity, maximum system voltage, minimum system voltage, correction factors, and margins. ...


IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles

This recommended practice describes methods for electrical sizing of nickel-cadmium batteries for application on rail passenger vehicles used for battery back-up of low voltage dc auxiliary power systems. It encompasses various factors that govern the electrical size of the battery including but not limited to number of cells, rated capacity, maximum system voltage, minimum system voltage, correction factors, and margins. ...


IEEE Standard for Communications Protocol Aboard Trains

This standard defines the protocol for Inter-car and Intra-car serial data communications between subsystems aboard passenger trains. It sets forth the minimum acceptable parameters for a network that can simultaneously handle monitoring and controls traffic from multiple systems. While the network itself is not vital, it is intended to be capable of carrying vital messages. The standard will be structured ...


IEEE Standard for Communications-Based Train Control (CBTC) Performance and Functional Requirements

Original Scope: This standard establishes a set of performance and functional requirements necessary for enhancing performance, availability, operations, and train protection using a CBTC System.---Revision: There is no change to the words of the scope. The revisions allow for driverless train operation, including automatic people movers.


More Standards

Jobs related to Rail Passenger Vehicles

Back to Top