865 resources related to Cable Terminations
- Conferences related to Cable Terminations
- Xplore Articles related to Cable Terminations
- Jobs related to Cable Terminations
- Educational Resources on Cable Terminations
2012 IEEE International Conference on Condition Monitoring and Diagnosis (CMD)Visit website
Condition monitoring and diagnosis for power equipments and power systems\,power plants\, dielectric materials and their aging mechanisms\, degradation assessment for power system\, application of information and communication technologies for condition monitoring and diagnosis\, tropical climate and other related issues including recycling\, reuse and mitigation\,strategic planning and management for condition monitoring and diagnosis.
Barras, R.E.; Snow, Joseph H.; Bow, Kenneth E.; Voltz, D.A. Petroleum and Chemical Industry Conference, 1996, Record of Conference Papers. The Institute of Electrical and Electronics Engineers Incorporated Industry Applications Society 43rd Annual, 1996
Environmental issues have had a profound influence on cable designs and materials used in cable construction. This paper addresses the issues concerned with the effects of cable on the environment, as well as the effects of environmental conditions on cable performance and reliability. Effects on the environment include release of toxic materials and contamination of ground water. Environmental effects on ...
Min-Yen Chiu; Chang-Hsing Lee; Chih-Hsien Huang; Shih-Shong Yen Condition Monitoring and Diagnosis, 2008. CMD 2008. International Conference on, 2008
The majority of cable failures on distribution system is caused by the defects in cable terminations and cable joints. Failure mechanisms reported in cable accessories are predominantly involve partial discharge deterioration caused by voids, contaminants and workmanship problems. Therefore, partial discharge measurement (PDM) is an effective diagnostic preventing cable system failure. However, conventional PDM needs outage and time consumption, and ...
Amyot, N.; David, E.; Fournier, D.; Jean, D.; Lalancette, D. Electrical Insulation and Dielectric Phenomena, 2002 Annual Report Conference on, 2002
In this paper, dielectric measurements performed on unaged, field-aged and artificially damaged cable joints are reported. All cable joints, but the unaged, were characterized with respect to their discharge inception and extinction voltages. Various types of unaged indoor and outdoor cable terminations were also analysed. Both time domain (TDS) and frequency domain dielectric spectroscopy (FDS) were performed at various voltage ...
Ahmed, N.; Morel, O.; Srinivas, N. Transmission and Distribution Conference, 1999 IEEE, 1999
This paper describes on-line and off-line partial discharge (PD) measuring techniques applicable to transmission cable terminations. The on-line technique can be utilized for both extruded and pipe-type cable terminations. In pipe-type cable terminations, the on-line technique is only applicable to newly installed terminations, as it requires an internal inductive sensor. In the case of extruded cable terminations, on-line testing is ...
Putter, H.T.; Gotz, D.; Petzold, F.; Bottcher, S. Condition Monitoring and Diagnosis (CMD), 2012 International Conference on, 2012
The medium voltage (MV) cable network is an important asset of a distribution system. It represents large investment, and it must guarantee a reliable operation and it is from economic point of view essential to extend the life time of the medium voltage power cables as much as possible. It is known that with increasing age, the number of faults ...
Specialist, Connectors, Flex & Cable Nokia Inc.
Electrical Engineer - Cable Assemblies - Automated Production Testing Molex
Electrical Engineer Overseas - Req. # : 10421 American Systems
Mechanical/Electrical Engineer Intern ITT Exelis
Electrical Engineer Teradyne
Fiber Optic Technician National Security Technologies, LLC
Electrical Engineer Specialist Dow Chemical
Electrical Engineer National Oilwell Varco
Network Administrators #158197 iTech US, Inc.
Assistant Electrical Engineer Burns & McDonnell
Electrical Engineer McDermott
Staff Electrical Engineer - Industrial Refineries Burns & McDonnell
Intern - Electrical Engineering (Maintenance Department) Alcoa Inc.
Associate Electrical Engineer McDermott
Senior Electrical Engineer Burns & McDonnell
Senior Electrical Engineer Burns & McDonnell
Electrical Engineer II Meggitt Control Systems
Electrical Engineer (Senior) Technip
Senior Electrical Engineer MADRID Technip
Senior Electrical Engineer - Industrial Refineries Burns & McDonnell
Sr. Electrical Engineer (Oil & Gas) WPX Energy, Inc.
Signal Integrity and High Speed I/O Engineer - Raleigh, NC Qualcomm, Inc.
IT Engineer, 2G/3G/4G Network optimization Qualcomm, Inc.
Electrical Engineer (based in Myanmar) Technip
Johnson, Larry Fiber Optic Connectors - Termination and Testing, 2009
In this tutorial we will review the methods used to bond, hold and align optical fibers for factory and field terminations. Scribing tools and techniques will also be covered. Next, proper polishing of the optical endface will be reviewed as well as the importance of cleaning optical surfaces to minimize damage, lower attenuation, and improve reflection values. This is followed ...
This standard covers all indoor and outdoor cable terminators used on alternating-current cables having laminated or extruded insulation rated 2.5 kV through 765 kV, except separable insulated connectors, which are covered by IEEE Std. 386-1995, IEEE Standard for Separable Insulated Connectors System for Power Distribution Systems above 600 V.
Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission
Research, development, design, application, construction, the installation and operation of apparatus, equipment, structures, materials, and systems for the safe, reliable, and economic delivery and control of electric energy for general industrial, commercial, public, and domestic consumption.