Productivity

View this topic in
Productivity is a measure of output from a production process, per unit of input. (Wikipedia.org)






Conferences related to Productivity

Back to Top

2013 35th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

The annual international technical forum on electrical overstress and electrostatic discharge. It's the one event where you will find technical papers that emphasize the latest research and technology; basic, intermediate, and advanced tutorials; exhibits of ESD control products and services; workshops; authors' corners; and more.

  • 2012 34th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

    The annual international technical forum on electrical overstress and electrostatic discharge. It's the one event where you will find technical papers that emphasize the latest research and technology; basic, intermediate, and advanced tutorials; exhibits of ESD control products and services; workshops; authors' corners; and more.

  • 2011 33rd Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

    The Symposium is dedicated to understanding issues related to electrical transients and electrical overstress, and the application of this knowledge to the solution of problems in consumer, industrial and military applications, including electronic components and manufacturing, as well as in, systems, subsystems and equipment.

  • 2010 32nd Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

    The Symposium is devoted to the understanding of issues related to electrical transients and electrical overstress, and the application of this knowledge to the solution of problems in consumer, industrial, medical and military applications, including compomnents and manufacturing

  • 2009 31st Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

    The Symposium is devoted to the understanding of issues related to electrical transients and electrical overstress, and the application of this knowlwdge to the solution of problems in consumer, inductrial and military applications, including components and manufacturing.

  • 2008 30th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

    The Symposium is devoted to the understanding of issues related to electrical transients and electrical overstress, and the application of this knowledge to the solution of problems in consumer, industrial and military applications, including componets and manufacturing.

  • 2007 29th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD)

    The International technical forum on electrical overstress and electrostatic discharge that features research, technology, and solutions to increase understanding, enhance quality and reliability, reduce and control costs, and improve yields and productivity. It's the one event where you will find technical papers that emphasize the latest research and technology; basic, intermediate, and advanced tutorials; exhibits of ESD control products and services; workshops; authors' corners; Program Manager Certifi


2013 8th International Forum on Strategic Technology (IFOST)

Strategic technologies including advanced materials, applied engineering sciences, information technologies, mechanical engineering, and so on.

  • 2012 7th International Forum on Strategic Technology (IFOST)

    International Forum on Strategic Technology is an annual academic conference and technical forum for researchers, engineers, industry representatives and policy planners.

  • 2011 6th International Forum on Strategic Technology (IFOST)

    1. Advanced Materials / Nano Technology 2. Renewable Energy / Smart Grid 3. Information Technology 4. E-vehicle / Green Car 5. Mechatronics 6. Others

  • 2010 International Forum on Strategic Technology (IFOST)

    a. e-Vehicle / Green Car b. New Materials c. Renewable Energy d. Smart Grid e. Bio-/Chemio-/Nano- Technology f. Other Strategic Technology

  • 2008 3rd International Forum on Strategic Technology (IFOST)

    New materials and technologies Nanotechnologies Information technologies Mechatronics and Automation Power engineering and resource-saving Environmental protection and conservancy

  • 2007 International Forum on Strategic Technology (IFOST)

    The International Forum organized under the main topic Power Engineering - Ecology will be carried out through the following sections: 1. Power Engineering 2. Mining Production and Metallurgy 3. Civil Engineering and Geo-Engineering 4. Information and Communication Technology 5. Ecosphere and Industrial Ecology

  • 2006 International Forum on Strategic Technology (IFOST) (Formerly known as KORUS)

  • 2005 Russian-Korean International Symposium on Science and Technology - (KORUS 2005)


2013 IEEE International Conference on Automation Science and Engineering (CASE 2013)

IEEE CASE is the flagship conference of IEEE Robotics and Automation Society. The conference aims to bring together researchers in automation from both industry and academia, together with industrial practitioners, to present and discuss the latest advances and developments in automation science and engineering.

  • 2012 IEEE International Conference on Automation Science and Engineering (CASE 2012)

    The goal of IEEE CASE is the broad coverage and dissemination of foundational research in automation among researchers, academics, and industry practitioners. The focus is on scientific methods for automated machines and systems operating in structured environments over long periods, and also on the explicit structuring of environments.

  • 2011 IEEE International Conference on Automation Science and Engineering (CASE 2011)

    The goal of IEEE CASE is for coverage and dissemination of foundational research on Automation. The focus of CASE 2011 is ICT in Automation and Management , dealing with the promising applications of ICT in the automation and management of different systems, including manufacturing, logistics, healthcare systems and disaster management.

  • 2010 IEEE International Conference on Automation Science and Engineering (CASE 2010)

    This conference emphasizes the partnership, connection, and synergy between industrial applications (including semiconductor manufacturing, life science automation, aerospace automation, renewable energy, biomedical systems, and micro and nano systems) and algorithmic and analytic foundation (planning, scheduling, manipulation, sensing and localization, and application domains).

  • 2009 IEEE International Conference on Automation Science and Engineering (CASE 2009)

    Foundational and application oriented research in the area of automation with focus on (a) Life Sciences and Healthcare (b) Manufacturing (c) Sensors (b) Knowledge based Automation

  • 2008 IEEE International Conference on Automation Science and Engineering (CASE 2008)

    The goal of IEEE CASE is for broad coverage and dissemination of foundationalresearch on Automation: scientific methods for machines and systems operating in structured environmentsover long periods, and for the explicit structuring of environments. IEEE CASE covers the abstractions,algorithms, theories, methodologies, models, systems, and case studies that can be applied across industries tosignificantly advance efficiency, quality, productivity, and reliability for society. Particularly, we seek a widepar


2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM)

The conference provides a forum for presentation and discussion of the state-of-art in electrical and electronic equipment and related areas, with inputs form industry and academia. The main topics cover: power electronics, electrical machines, electromagnetics, control systems, image processing; mechatronics, renewable energy, nano-electronics, system integration and electrical engineering education.


2012 IEEE 16th International Conference on Computer Supported Cooperative Work in Design (CSCWD)

Collaboration technologies and applications to the design of processes, products, systems, and services in industries and societies. Application domains include aerospace, automotive, manufacturing, logistics, transportation, power and energy, healthcare, infrastructure, administration, social networks, and entertainment.


More Conferences

Periodicals related to Productivity

Back to Top

Software Engineering, IEEE Transactions on

Specification, development, management, test, maintenance, and documentation of computer software.


Software, IEEE

IEEE Software's mission is to build the community of leading and future software practitioners. The magazine delivers reliable, useful, leading-edge software development information to keep engineers and managers abreast of rapid technology change. The authority on translating software theory into practice, IEEE Software is positioned between pure research and pure practice, transferring ideas, methods, and experiences among researchers and engineers. ...


Solid-State Circuits, IEEE Journal of

The IEEE Journal of Solid-State Circuits publishes papers each month in the broad area of solid-state circuits with particular emphasis on transistor-level design of integrated circuits. It also provides coverage of topics such as device modeling, technology, systems design, layout, and testing that relate directly to IC design. Integrated circuits and VLSI are of principal interest; material related to discrete ...



Most published Xplore authors for Productivity

Back to Top

Xplore Articles related to Productivity

Back to Top

Performance of PMASynRM With Ferrite Magnets for EV/HEV Applications Considering Productivity

Masahiro Obata; Shigeo Morimoto; Masayuki Sanada; Yukinori Inoue IEEE Transactions on Industry Applications, 2014

Although motors that use rare-earth permanent magnets typically exhibit high performance, their cost is high, and there are concerns about the stability of the raw material supply. This paper proposes a permanent-magnet-assisted synchronous reluctance motor (PMASynRM) with a ferrite magnet that does not use rare-earth materials considering productivity. The performance of the proposed PMASynRM is evaluated based on the finite-element ...


Software development of a catalogue of engineering symbols as an add-on facility for use in CAD

W. R. Nyemba; C. Mbohwa 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2016

Production of engineering drawings have evolved from manual to Computer Aided Design (CAD), primarily for the speed and accuracy presented by CAD. Unlike modelling and simulation packages that are equipped with building blocks, CAD packages are generally supplied with no pre-drawn symbols. From best practices in industrial engineering and working for companies that make use of CAD systems, evidently a ...


Exploring formal programmes supporting pre-competitive research collaboration in science & technology in European Research Area

Ruslan Rakhmatullin; Louis Brennan PICMET 2010 TECHNOLOGY MANAGEMENT FOR GLOBAL ECONOMIC GROWTH, 2010

At the Lisbon Summit in 2000, the European Union (EU) Heads of States confirmed that knowledge and innovation are vital to Europe's growth and agreed to make the EU the most competitive knowledge-driven economy. The EU's ability to facilitate innovation by strengthening its research capacities is central to achieving this goal. Some of the practical initiatives under this innovation policy ...


Adaptive pole-zero cancellation in grinding force control

H. E. Jenkins; T. R. Kurfess IEEE Transactions on Control Systems Technology, 1999

Describes the development of an adaptive force controller for the grinding process. Using a real-time grinding model an adaptive pole-zero cancellation technique is developed and implemented to reduce the grinding process variation. Real-time model parameter estimation and controller designs are implemented to achieve higher bandwidth control capability than is presently available in machine tool controllers. The results of this research ...


Scaling Rules For Mos Analog Design Reuse

T. Levi; N. Lewis; J. Tomas; P. Fouillat Proceedings of the International Conference Mixed Design of Integrated Circuits and System, 2006. MIXDES 2006., 2006

In this paper we propose a methodology for analog design reuse during technology scaling. This method is based on resizing rules resulting in the application of a MOS transistor model. The aims of this scaling are the conservation of the performances of the original circuit and the reduction of power consumption and area. This resizing methodology has been applied on ...


More Xplore Articles

Educational Resources on Productivity

Back to Top

eLearning

Performance of PMASynRM With Ferrite Magnets for EV/HEV Applications Considering Productivity

Masahiro Obata; Shigeo Morimoto; Masayuki Sanada; Yukinori Inoue IEEE Transactions on Industry Applications, 2014

Although motors that use rare-earth permanent magnets typically exhibit high performance, their cost is high, and there are concerns about the stability of the raw material supply. This paper proposes a permanent-magnet-assisted synchronous reluctance motor (PMASynRM) with a ferrite magnet that does not use rare-earth materials considering productivity. The performance of the proposed PMASynRM is evaluated based on the finite-element ...


Software development of a catalogue of engineering symbols as an add-on facility for use in CAD

W. R. Nyemba; C. Mbohwa 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2016

Production of engineering drawings have evolved from manual to Computer Aided Design (CAD), primarily for the speed and accuracy presented by CAD. Unlike modelling and simulation packages that are equipped with building blocks, CAD packages are generally supplied with no pre-drawn symbols. From best practices in industrial engineering and working for companies that make use of CAD systems, evidently a ...


Exploring formal programmes supporting pre-competitive research collaboration in science & technology in European Research Area

Ruslan Rakhmatullin; Louis Brennan PICMET 2010 TECHNOLOGY MANAGEMENT FOR GLOBAL ECONOMIC GROWTH, 2010

At the Lisbon Summit in 2000, the European Union (EU) Heads of States confirmed that knowledge and innovation are vital to Europe's growth and agreed to make the EU the most competitive knowledge-driven economy. The EU's ability to facilitate innovation by strengthening its research capacities is central to achieving this goal. Some of the practical initiatives under this innovation policy ...


Adaptive pole-zero cancellation in grinding force control

H. E. Jenkins; T. R. Kurfess IEEE Transactions on Control Systems Technology, 1999

Describes the development of an adaptive force controller for the grinding process. Using a real-time grinding model an adaptive pole-zero cancellation technique is developed and implemented to reduce the grinding process variation. Real-time model parameter estimation and controller designs are implemented to achieve higher bandwidth control capability than is presently available in machine tool controllers. The results of this research ...


Scaling Rules For Mos Analog Design Reuse

T. Levi; N. Lewis; J. Tomas; P. Fouillat Proceedings of the International Conference Mixed Design of Integrated Circuits and System, 2006. MIXDES 2006., 2006

In this paper we propose a methodology for analog design reuse during technology scaling. This method is based on resizing rules resulting in the application of a MOS transistor model. The aims of this scaling are the conservation of the performances of the original circuit and the reduction of power consumption and area. This resizing methodology has been applied on ...


More eLearning Resources

IEEE-USA E-Books

  • Indonesia

    In this book Peter Lindert evaluates environmental concerns about soil degradation in two very large countries--China and Indonesia--where anecdotal evidence has suggested serious problems. Lindert does what no scholar before him has done: using new archival data sets, he measures changes in soil productivity over long enough periods of time to reveal the influence of human activity.China and Indonesia are good test cases because of their geography and history. China has been at the center of global concerns about desertification and water erosion, which it may have accelerated with intense agriculture. Most of Indonesia¹s lands were created by volcanoes and erosion, and its rapid deforestation and shifting slash-burn agriculture have been singled out for international censure.Lindert's investigation suggests that human mismanagement is not on average worsening the soil quality in China and Indonesia. Human cultivation lowers soil nitrogen and organic matter, but has offsetting positive effects. Economic development and rising incomes may even lead to better soil. Beyond the importance of Lindert's immediate findings, this book opens a new area of study--quantitative soil history--and raises the standard for debating soil trends.

  • Factories of the Future

    This chapter contains sections titled: Here Comes the Automatic Factory, The Robots Have Arrived, Computer-Aided Design and Manufacturing, Flexible Manufacturing Systems, Japan's Productivity Challenge to America and Europe, Factory Automation: Vision and Reality

  • Index

    **Addresses the methodology and theoretical foundation of battery manufacturing, service and management systems (BM2S2), and discusses the issues and challenges in these areas** This book brings together experts in the field to highlight the cutting edge research advances in BM2S2&nbsp_place_holder;and to promote an innovative integrated research framework responding to the challenges. There are three major parts included in this book: manufacturing, service, and management. The first part focuses on battery manufacturing systems, including modeling, analysis, design and control, as well as economic and risk analyses.&nbsp_place_holder; The second part focuses on information technology's impact on service systems, such as data-driven reliability modeling, failure prognosis, and service decision making methodologies for battery services. The third part addresses battery management systems (BMS) for control and optimization of battery cells, opera ions, and hybrid storage systems to ensure overall performance and safety, as well as EV management.&nbsp_place_holder; The contributors consist of experts from universities, industry research centers, and government agency. In addition, this book: * Provides comprehensive overviews of lithium-ion battery and battery electrical vehicle manufacturing, as well as economic returns and government support * Introduces integrated models for quality propagation and productivity improvement, as well as indicators for bottleneck identification and mitigation in battery manufacturing * Covers models and diagnosis algorithms for battery SOC and SOH estimation, data-driven prognosis algorithms for predicting the remaining useful life (RUL) of battery SOC and SOH * Presents mathematical models and novel structure of battery equalizers in battery management systems (BMS) * Reviews the state of the art of battery, supercapacitor, and battery-supercapacitor hybrid energy st rage systems (HESSs) for advanced electric vehicle applications _Advances in Battery Manufacturing, Services, and Management Systems_&nbsp_place_holder;is written for researchers and engineers working on battery manufacturing, service, operations, logistics, and management. It can also serve as a reference for senior undergraduate and graduate students interested in BM2S2.

  • Consequences for Indonesian Agriculture

    This chapter contains section titled: Alternative Approaches, The Impact of Soils on Agricultural Productivity in 1990, Fertilizer as a Substitute for Soil Quality, Indonesia's Net Investment in Soils, 1940-1990

  • Software Economics

    This chapter contains sections titled: Software and Its Impact: A Quantitative Assessment Software Engineering Economics Improving Software Productivity Managing Software Productivity and Reuse Software Economics: A Roadmap Early Experiences in Software Economics

  • Getting Things Done: Productivity, Self-Management, and the Order of Things

    This chapter contains sections titled: Feeling Productive, (Still) Getting Things Done, GTD's Order of Things, The Territory of the Postprofessional, Notes, References

  • Sharing and Reuse in Knowledge Discovery

    This chapter explains why the reuse and shareability of all the types of components that are used in knowledge discovery processes can be useful to improve efficiency and productivity. It illustrates the variety of descriptions that are needed for processing elements - this would be extended to functions and types. This metadata is organized as libraries of components. The chapter also shows that these descriptions can be layered according to different types of vocabularies, which focus on different aspects of the description of components. Data analysis ontologies are domain-independent vocabularies that support the broad description of the data analysis tasks undertaken in the knowledge discovery process. Finally, domain ontologies are one of the most important types of ontologies to be considered in this effort to support shareability and reusability of processing elements, functions, and types.

  • The Electronic Office

    This chapter contains sections titled: Now It's the Office of the Future, Convergent Technologies, Dreams and Realities, Slow Progress with Productivity, The Changing Pattern of Office Work, The Automated Office: Prison or Paradise?

  • What Must be Verified in an Estimation Process: An Overview

    This chapter provides an overview of what must be verified at each phase of a software estimation process, including the direct inputs used to build an estimation process, the use of the productivity model itself, the adjustment phase, the budgeting phase and the re-estimation process. Software engineers and managers use an estimation process to make commitments that are financially significant for their organization and professionally important for their own career. The chapter verifies the direct inputs to the estimation process. The first verification step consists of identifying the inputs to the estimation process and documenting the quality of those inputs when estimating a specific project for a specific context. The productivity model is not verified each time an estimate is made for a project. Typically, it is verified only once, when the productivity model is first built, or when an estimation tool is selected from external sources.

  • Knowledge and Innovation

    Innovators across all sectors of society are using information and communication technology to reshape economic and social activity. Even after the boom -- and despite the bust -- the process of structural change continues across organizational boundaries. Transforming Enterprise considers the implications of this change from a balanced, post-bust perspective. Original essays examine the impact on the economy as a whole, and, in particular, the effect on productivity; the role of information technology in creating and using knowledge -- especially knowledge that leads to innovation; and new organizational models, as seen in the interlocking and overlapping networks made possible by the Internet. The authors also analyze structural changes in specific sectors, including the effect of information technology on the automotive industry, demand-driven production and flexible value chains in the personal computer industry, and new models of outsourced manufacturing in the electronics industry. The final essays examine the societal implications of the diverse ways that information technologies are used -- across individuals, groups, communities, and nations -- and considering questions of access and the digital divide.



Standards related to Productivity

Back to Top

IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity

This document standardizes terminology and indexes for reporting electric generating unit reliability, availability, and productivity performance measures while recognizing the power industry’s needs, including marketplace competition. This standard also includes equations for equivalent demand forced outage rate (EFORd), newly identified outage states, discussion of commercial availability, energy weighted equations for group performance indexes, definitions of outside management control (OMC), pooling ...



Jobs related to Productivity

Back to Top