Conferences related to Aging

Back to Top

2017 IEEE 67th Electronic Components and Technology Conference (ECTC)

premier components, packaging and technology conference

  • 2019 IEEE 69th Electronic Components and Technology Conference (ECTC)

    premier components, packaging and technology conference

  • 2016 IEEE 66th Electronic Components and Technology Conference (ECTC)

    premier components, packaging and technology conference

  • 2014 IEEE 64th Electronic Components and Technology Conference (ECTC)

    Premier components, packaging and technology

  • 2013 IEEE 63rd Electronic Components and Technology Conference (ECTC)

    premier components, packaging and technology conference

  • 2012 IEEE 62nd Electronic Components and Technology Conference (ECTC)

    ECTC is the premier international electronics symposium that brings together the best in packaging, components and microelectronic systems science, technology and education in an environment of cooperation and technical exchange.

  • 2011 IEEE 61st Electronic Components and Technology Conference (ECTC)

    ECTC is the premier international electronics symposium that brings together the best in packaging, components and microelectronic systems science, technology and education in an environment of cooperation and technical exchange.

  • 2010 IEEE 60th Electronic Components and Technology Conference (ECTC 2010)

    ECTC is the premier international electronics symposium that brings together the best in packaging, components and microelectronic systems science, technology and education in an environment of cooperation and technical exchange.

  • 2009 IEEE 59th Electronic Components and Technology Conference (ECTC 2009)

    Advanced packaging, electronic components & RF, emerging technologies, materials & processing, manufacturing technology, interconnections, quality & reliability, modeling & simulation, optoelectronics.

  • 2008 IEEE 58th Electronic Components and Technology Conference (ECTC 2008)

  • 2007 IEEE 57th Electronic Components and Technology Conference (ECTC 2007)


2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2014)

Topics of interest to the Conference include: Aging, Bio-dielectrics, Charge storage and transport, Electro-hydrodynamics, Flow electrification, High-field effects, High frequency dielectric phenomena, Measurement techniques, Nano-dielectrics, Outdoor insulation, Partial discharge measurements, Polarization phenomena, Pre-breakdown and breakdown in solids, liquids, gases, and vacuum, Surface flashover, Treeing, and Cryogenic dielectrics

  • 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2012)

    The Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) is sponsored by the IEEE Dielectrics and Electrical Insulation Society to provide an international forum for the discussion of current research on electrical insulation, dielectric phenomena and related topics. The conference provides an opportunity for specialists from around the world to meet and to discuss ongoing research. Topics of interest to the Conference include: aging, biodielectrics, charge storage and transport cryogenic dielectrics, etc... prebreakdown and breakdown in solids, liquids, gases, and vacuum surface flashover, and treeing.

  • 2011 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2011)

    CEIDP provides an international forum for the discussion and presentations of current research on electrical insulation, dielectric phenomena, and related topics. The Conference provides a great opportunity for researchers and scientists from all over the world to meet and discuss ongoing research. Topics of interest to the Conference include: aging, biodielectrics, outdoor insulation, nanodilectrics, partial discharges, surface flashover, high field effects, polarization phenomena.

  • 2010 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2010)

    CEIDP provides an international forum for teh discussion and presentation of current research on electrical insulation, dielectric phenomena and realted topics. The ocnference provides a great opportunity for researchers and scientists from around teh world to meet and discuss onglong research. Topics of interest to the Conference include:aging, biodielectrics, outdoor insulation, surface flashover, partial discharge measurements, polarization phenomena, measurement techniques, flow electrification, schrag

  • 2009 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2009)

    CEIDP provides an international forum for the discussion of current research on electrical insulation, dielectric phenomena and related topics. The conference provides an opportunity for specialists from around the world to meet and to discuss ongoing research. Topics of interest to the Conference include: aging; biodielectrics; outdoor insulation; surface flashover; polarization phenomena; measurement techniques; partial discharge measurements; flow electrification; charge storage and transport; electrohy

  • 2008 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2008)

    To provide an international forum for the discussion of current research on electrical insulation, dielectric phenomena and related topics.


2013 Design, Automation & Test in Europe Conference & Exhibition (DATE 2013)

DATE is the complete event for the European electronic and test community. A leading world conference and exhibition, DATE unites 2,000 professionals with approximately 60 exhibiting companies, cutting edge R&D, industrial designers and technical managers from around the world.


2013 IEEE 15th International Conference on e-Health Networking, Applications and Services (Healthcom 2013)

It aims at bringing together interested parties from around the world working in the health care field to exchange ideas, to discuss innovative and emerging solutions, and to develop collaborations.


2013 IEEE International Conference on Computer Vision (ICCV)

Latest research in Computer Vision, including medical imaging, surveillance, tracking, 3D vision, and vision-based graphics.

  • 2011 IEEE International Conference on Computer Vision (ICCV)

    The International Conference on Computer Vision is the prime event in the area of computer vision. High-quality papers are accepted on both theoretical foundations and practical applications. It covers subfields like object recognition, 3D acquisition and modeling, computational photography, tracking and gesture analysis, and image filtering and enhancement.

  • 2009 IEEE 12th International Conference on Computer Vision (ICCV)

    Early Vision and Sensors Color, Illumination and Texture Segmentation and Grouping Motion and Tracking Stereo and Structure from Motion Image-Based Modeling Physics-Based Modeling Statistical Methods and Learning in Vision Video Surveillance and Monitoring Object, Event and Scene Recognition Vision-Based Graphics Image and Video Retrieval Performance Evaluation Applications


More Conferences

Periodicals related to Aging

Back to Top

Device and Materials Reliability, IEEE Transactions on

Provides leading edge information that is critical to the creation of reliable electronic devices and materials, and a focus for interdisciplinary communication in the state of the art of reliability of electronic devices, and the materials used in their manufacture. It focuses on the reliability of electronic, optical, and magnetic devices, and microsystems; the materials and processes used in the ...


Pattern Analysis and Machine Intelligence, IEEE Transactions on

Statistical and structural pattern recognition; image analysis; computational models of vision; computer vision systems; enhancement, restoration, segmentation, feature extraction, shape and texture analysis; applications of pattern analysis in medicine, industry, government, and the arts and sciences; artificial intelligence, knowledge representation, logical and probabilistic inference, learning, speech recognition, character and text recognition, syntactic and semantic processing, understanding natural language, expert systems, ...


Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control was the number-three journal in acoustics in 2002, according to the annual Journal Citation Report (2002 edition) published by the Institute for Scientific Information. This publication focuses on the theory, design, and application on generation, transmission, and detection of bulk and surface mechanical waves; fundamental studies in physical acoustics; design of sonic ...




Xplore Articles related to Aging

Back to Top

An adaptive current control strategy for automotive HID lamps with full digital platform

Biwen Xu; Xiaofeng Lv; Zirui Jia; Min Chen; Zhaoming Qian IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society, 2011

This paper presents an adaptive current control strategy for automotive HID lamps. The proposed control strategy realizes lamp voltage, current or power control only using current feedback control mode, which simplifies the control system and improves the operation performance. For high ignition success rate, the current response speed of the DC-DC converter after break-over is optimized. In addition, an adaptive ...


Modeling Software Rejuvenation on a Redundant System Using Monte Carlo Simulation

Sonia Malefaki; Vasilis P. Koutras; Agapios N. Platis 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops, 2012

In this paper, rejuvenation is modeled in a redundant computer system in order to counteract software aging. The evolution of such a system in time could be modeled by a Markov or a semi-Markov process. Nevertheless, due to generally distributed repair times of system components, the entire system is non -- Markovian. Thus, Monte Carlo simulation methods are used for ...


Multiformalism to Support Software Rejuvenation Modeling

Enrico Barbierato; Andrea Bobbio; Marco Gribaudo; Mauro Iacono 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops, 2012

The study of software aging and rejuvenation is based on models that conjugate the complexity of architectural models with the problem of time dependence of parameters. Exploiting the metaphors of common performance-oriented modeling formalisms (such as Petri nets or queuing networks) with the support of proper solution techniques can help modelers in approaching the analysis of complex software-based systems. This ...


Monitoring of Aging Software Systems Affected by Integer Overflows

Domenico Cotroneo; Roberto Natella 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops, 2012

Numerical aging-related bugs, which can manifest themselves as the accumulation of floating-point errors and the overflow of integers, represent a known but relatively neglected issue in the field of software aging and rejuvenation. Unfortunately, it is very difficult to avoid and to fix these bugs, since the rules of computer arithmetic and programming languages are often misunderstood or disregarded by ...


Capturing age-related alternations in the human smooth pursuit mechanism by Volterra models

Alexander Medvedev; Daniel Jansson 2016 American Control Conference (ACC), 2016

A method for quantifying the effects of aging in the human smooth pursuit system is proposed. The dynamical properties of the oculomotor system are characterized by means of a truncated Volterra model that has previously been utilized for distinguishing between patients diagnosed with Parkinson's disease and healthy controls. The orthonormal basis of Laguerre functions is employed for the parameterization of ...


More Xplore Articles

Educational Resources on Aging

Back to Top

eLearning

An adaptive current control strategy for automotive HID lamps with full digital platform

Biwen Xu; Xiaofeng Lv; Zirui Jia; Min Chen; Zhaoming Qian IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society, 2011

This paper presents an adaptive current control strategy for automotive HID lamps. The proposed control strategy realizes lamp voltage, current or power control only using current feedback control mode, which simplifies the control system and improves the operation performance. For high ignition success rate, the current response speed of the DC-DC converter after break-over is optimized. In addition, an adaptive ...


Modeling Software Rejuvenation on a Redundant System Using Monte Carlo Simulation

Sonia Malefaki; Vasilis P. Koutras; Agapios N. Platis 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops, 2012

In this paper, rejuvenation is modeled in a redundant computer system in order to counteract software aging. The evolution of such a system in time could be modeled by a Markov or a semi-Markov process. Nevertheless, due to generally distributed repair times of system components, the entire system is non -- Markovian. Thus, Monte Carlo simulation methods are used for ...


Multiformalism to Support Software Rejuvenation Modeling

Enrico Barbierato; Andrea Bobbio; Marco Gribaudo; Mauro Iacono 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops, 2012

The study of software aging and rejuvenation is based on models that conjugate the complexity of architectural models with the problem of time dependence of parameters. Exploiting the metaphors of common performance-oriented modeling formalisms (such as Petri nets or queuing networks) with the support of proper solution techniques can help modelers in approaching the analysis of complex software-based systems. This ...


Monitoring of Aging Software Systems Affected by Integer Overflows

Domenico Cotroneo; Roberto Natella 2012 IEEE 23rd International Symposium on Software Reliability Engineering Workshops, 2012

Numerical aging-related bugs, which can manifest themselves as the accumulation of floating-point errors and the overflow of integers, represent a known but relatively neglected issue in the field of software aging and rejuvenation. Unfortunately, it is very difficult to avoid and to fix these bugs, since the rules of computer arithmetic and programming languages are often misunderstood or disregarded by ...


Capturing age-related alternations in the human smooth pursuit mechanism by Volterra models

Alexander Medvedev; Daniel Jansson 2016 American Control Conference (ACC), 2016

A method for quantifying the effects of aging in the human smooth pursuit system is proposed. The dynamical properties of the oculomotor system are characterized by means of a truncated Volterra model that has previously been utilized for distinguishing between patients diagnosed with Parkinson's disease and healthy controls. The orthonormal basis of Laguerre functions is employed for the parameterization of ...


More eLearning Resources

IEEE-USA E-Books

  • Appendix 2: Crystal Manufacturers

    Quartz crystal-a technology that changed the tide of World War II Some of the defining leaps in technology in the twentieth century occurred during the Second World War, from radar to nuclear energy. Often left out of historical discussions are quartz crystals, which proved to be just as pivotal to the Allied victory-and to post-war development-as other technologies. Quartz crystals provided the U.S. military, for the first time, with reliable communication on the front lines, and then went on to become the core of some of the most basic devices of the post-war era, from watches, clocks, and color televisions, to cell phones and computers. In Crystal Clear, Richard Thompson relates the story of the quartz crystal in World War II, from its early days as a curiosity for amateur radio enthusiasts, to its use by the United States Armed Forces. It follows the intrepid group of scientists and engineers from the Office of the Chief Signal Officer of the U.S. Army as they ra ed to create an effective quartz crystal unit. They had to find a reliable supply of radio-quality quartz; devise methods to reach, mine, and transport the quartz; find a way to manufacture quartz crystal oscillators rapidly; and then solve the puzzling "aging problem" that plagued the early units. Ultimately, the development of quartz oscillators became the second largest scientific undertaking in World War II after the Manhattan Project. Bringing to light a little-known aspect of World War II, Crystal Clear offers a glimpse inside one of the most significant efforts in the annals of engineering.

  • References

    Quartz crystal-a technology that changed the tide of World War II Some of the defining leaps in technology in the twentieth century occurred during the Second World War, from radar to nuclear energy. Often left out of historical discussions are quartz crystals, which proved to be just as pivotal to the Allied victory-and to post-war development-as other technologies. Quartz crystals provided the U.S. military, for the first time, with reliable communication on the front lines, and then went on to become the core of some of the most basic devices of the post-war era, from watches, clocks, and color televisions, to cell phones and computers. In Crystal Clear, Richard Thompson relates the story of the quartz crystal in World War II, from its early days as a curiosity for amateur radio enthusiasts, to its use by the United States Armed Forces. It follows the intrepid group of scientists and engineers from the Office of the Chief Signal Officer of the U.S. Army as they ra ed to create an effective quartz crystal unit. They had to find a reliable supply of radio-quality quartz; devise methods to reach, mine, and transport the quartz; find a way to manufacture quartz crystal oscillators rapidly; and then solve the puzzling "aging problem" that plagued the early units. Ultimately, the development of quartz oscillators became the second largest scientific undertaking in World War II after the Manhattan Project. Bringing to light a little-known aspect of World War II, Crystal Clear offers a glimpse inside one of the most significant efforts in the annals of engineering.

  • Surface EMG Applications in Neurophysiology

    This chapter focuses on the basics of surface electromyography (sEMG) and related methods for the study of human motor control and its adaptations. Recordings of voluntary sEMG provide partial information on the mechanisms involved in muscle activity. However, the combination of sEMG and methods based on electrically and magnetically evoked potentials allows stepping further in a comprehensive approach of movement strategies during tasks, and the influence of various factors such as etiology of cramps, fatigue, training, aging on such strategies. The recorded sEMG signal represents the electrical activity of numerous motor units. The chapter describes the basic methodology to record H-reflex and the relevant factors to consider when assessing its modulations. sEMG and evoked potentials provide relevant information on age-related changes within the muscle and the nervous system, as well as on the neural adjustments required to perform various motor tasks.

  • General Principles of Testing and Monitoring

    This chapter describes on-line and off-line tests and monitors that can be used on rotor and stator windings, as well as stator and rotor cores. We include discussions on several issues that are common to all of the tests and monitors.

  • Salient Pole Rotor Winding Failure Mechanisms and Repair

    Modern salient pole winding designs use aramid paper ground and turn insulation in strip-on-edge windings, resin-bonded glass laminate pole washers DacronTM and glass-covered high-temperature enamel turn insulation in wire wound poles, and thermosetting bonding resins. Insulation aging from thermal cycling occurs mainly in synchronous motors and generators that are started and stopped frequently. Salient pole rotor windings, especially strip-on-edge types, are generally susceptible to failure from contamination by conducting materials because they rely on adequate creepage distances between bare copper conductors to prevent shorts. Abrasive dust from the surrounding atmosphere carried into the interior of a motor or generator by cooling air will abrade the rotor winding insulation surfaces. Among the most common causes of failure in salient pole rotor windings are the continuous centrifugal forces imposed on them by rotation and the cyclic centrifugal forces induced by starting and stopping.

  • Index

    Quartz crystal-a technology that changed the tide of World War II Some of the defining leaps in technology in the twentieth century occurred during the Second World War, from radar to nuclear energy. Often left out of historical discussions are quartz crystals, which proved to be just as pivotal to the Allied victory-and to post-war development-as other technologies. Quartz crystals provided the U.S. military, for the first time, with reliable communication on the front lines, and then went on to become the core of some of the most basic devices of the post-war era, from watches, clocks, and color televisions, to cell phones and computers. In Crystal Clear, Richard Thompson relates the story of the quartz crystal in World War II, from its early days as a curiosity for amateur radio enthusiasts, to its use by the United States Armed Forces. It follows the intrepid group of scientists and engineers from the Office of the Chief Signal Officer of the U.S. Army as they ra ed to create an effective quartz crystal unit. They had to find a reliable supply of radio-quality quartz; devise methods to reach, mine, and transport the quartz; find a way to manufacture quartz crystal oscillators rapidly; and then solve the puzzling "aging problem" that plagued the early units. Ultimately, the development of quartz oscillators became the second largest scientific undertaking in World War II after the Manhattan Project. Bringing to light a little-known aspect of World War II, Crystal Clear offers a glimpse inside one of the most significant efforts in the annals of engineering.

  • Possible Medical Applications of Nanotechnology

    This chapter contains sections titled: Medical Uses of Nanotechnology, Molecular Approaches to Disease, Aging, Conclusion, Notes, Discussion, Postscript

  • Core Testing

    This chapter describes the main tests that are commercially available for assessing rotor and stator core tightness and stator core insulation condition. All of the conventional forms of these tests require the motor or generator to be taken out of service. The tests covered are: 1) knife test; 2) rated flux test; 3) core loss test; 4) low flux (El-CID) test. For each test, the purpose is described, as well as the types of machines it is useful for. The theory of the test and its advantages and disadvantages are also covered. Finally, practical guidelines on performing the test and interpreting the results are given.

  • OffLine Rotor and Stator Winding Tests

    This chapter describes the main tests that are commercially available for assessing the condition of rotor and stator windings. The purpose of each test will be described, together with the types of machines and/or windings it is useful for. The theory of the test will also be described where it is not obvious. In addition, each test will be compared to other similar tests. Practical information is given on how to apply the test, including the state the winding must be in to do the test and the normal time it takes to do the test. Finally, a practical guide is given on interpreting the results. This interpretation will reflect the experience of test users rather than test vendors or the very general interpretation that may be published in industry standards.

  • Wound Rotor Winding Failure Mechanisms and Repair

    In a wound rotor induction motor or generator, there is a transformer coupling effect between the stator and rotor windings. Unbalanced stator winding power supply voltages will induce negative sequence voltages and currents in the rotor winding. If a joint between two conductors has been poorly soldered/brazed or the compression clip joint poorly made, it will present a high resistance to the current flowing through it under load and this will produce overheating of the joint insulation. Application of banding over the rotor end windings is required to brace them against the high centrifugal forces imposed on them during operation. The three slip rings in a wound rotor motor must be separated from the shaft by a layer of insulation applied between the two. The spacing between the rings must be sufficient to provide an adequate electrical creepage distance and in some designs insulating barriers are used to achieve this.



Standards related to Aging

Back to Top

IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations

This document provides the guidelines for assessing, monitoring, and mitigating aging degradation effects on class 1E equipment used in nuclear power generating stations.


IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections

The scope of the corrigendum is to correct three typographical errors of a minor technical nature (two in Clause 6.6.3 and one in Annex D, Clause D.1.7) related to performing thermal aging analysis.


IEEE Guide for Measurement of Environmental Sensitivities of Standard Frequency Generators

This project is a revision of the existing guide for measurements of environmental sensitivities of standard frequency generators. It includes effects and metrology of acceleration; temperature, humidity, and pressure; electrical and magnetic fields; ionizing and particle radiation; and aging, warm-up time and retrace.