IEEE Organizations related to ISDN

Back to Top


Conferences related to ISDN

Back to Top

2010 International Symposium on Dielectrics for Nanosystems:Materials Science, Processing, Reliability, and Manufacturing (ISDN)

Nanoelectronics have reached below 100 nm. Depending on the application, the nanosystem may consist of one or more of the following types of functional components: electronic, optical, magnetic, mechanical, biological, chemical, energy sources, and various types of sensing devices. Papers are solicited in all areas of dielectric issues in nanosystems. In addition to traditional areas of semiconductor processing and packaging of nanoelectronics, emphasis will be placed on areas where multifunctional device i


2008 International Symposium on Dielectrics for Nanosystems:Materials Science, Processing, Reliability, and Manufacturing (ISDN)

Advanced semiconductor products that are true representatives of nanoelectronics have reached below 100 nm. Depending on the application, the nanosystem may consist of one or more of the following types of functional components: electronic, optical, magnetic, mechanical, biological, chemical, energy sources, and various types of sensing devices. As long as one or more of these functional devices is in 1-100 nm dimensions, the resultant system can be defined as nanosystem. Papers are solicited in all areas o


2006 International Symposium on Dielectrics for Nanosystems:Materials Science, Processing, Reliability, and Manufacturing II (ISDN)



Periodicals related to ISDN

Back to Top

Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


Consumer Electronics, IEEE Transactions on

The design and manufacture of consumer electronics products, components, and related activities, particularly those used for entertainment, leisure, and educational purposes


Proceedings of the IEEE

The most highly-cited general interest journal in electrical engineering and computer science, the Proceedings is the best way to stay informed on an exemplary range of topics. This journal also holds the distinction of having the longest useful archival life of any EE or computer related journal in the world! Since 1913, the Proceedings of the IEEE has been the ...


Selected Areas in Communications, IEEE Journal on

All telecommunications, including telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space, and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; communication theory; and wireless communications.




Xplore Articles related to ISDN

Back to Top

Probe for measuring interference voltages at ISDN telecommunication line interfaces

N. Kuwabara; T. Ideguchi IEEE 1988 International Symposium on Electromagnetic Compatibility, 1988

A probe with asymmetrical characteristic impedance is proposed for measuring interference voltages at integrated services digital network (ISDN) line interfaces. The measurement error due to longitudinal conversion loss (LCL) of the telecommunication lines is studied. The investigation shows that the normal-mode interference voltages must be measured to estimate the common-mode voltages, which are converted from normal-mode voltages by unbalance of ...


Adaptive Interaction Fault Location Based on Combinatorial Testing

Ziyuan Wang; Baowen Xu; Lin Chen; Lei Xu 2010 10th International Conference on Quality Software, 2010

Combinatorial testing aims to detect interaction faults, which are triggered by interaction among parameters in system, by covering some specific combinations of parametric values. Most works about combinatorial testing focus on detecting such interaction faults rather than locating them. Based on the model of interaction fault schema, in which the interaction fault is described as a minimum fault schema and ...


A four-channel CMOS codec filter circuit “SICOFI-4”

M. Tiefenbacher; P. Caldera; F. Dielacher; J. Hauptmann; M. Steiner IEEE Journal of Solid-State Circuits, 1994

Cost reduction by integration of complex mixed analog-digital systems on a single chip and an excellent yield to area ratio is a major goal for IC design in the nineties. In this paper, a four-channel codec-filter chip for analog subscriber lines in ISDN-orientated networks is presented, giving an exceptional example for high level system implementation combined with parallel DSP integration ...


Development concept of STM-based high speed digital FTTH systems

S. -I. Aoyagi; K. -I. Sano; E. Yoneda Global Telecommunications Conference, 1991. GLOBECOM '91. 'Countdown to the New Millennium. Featuring a Mini-Theme on: Personal Communications Services, 1991

Various approaches to realizing economical FTTH (fiber-to-the-home) systems via the use of single mode fibers are being developed. A strategy is discussed for realizing such systems, especially STM (synchronous transfer mode) based high-speed digital FTTH systems, which can provide not only N-ISDN services but also high-speed digital services such as center-to-end video services. The first prototype system of a single-star ...


The implementation of station acquisition process for the hybrid fiber-coax network

Chen Huifang; Qiu Peiliang Communication Technology Proceedings, 1998. ICCT '98. 1998 International Conference on, 1998

It is widely recognized that the hybrid fiber-coax (HFC) networks remove customer broadband access "bottleneck" for the B-ISDN and information superhighway. In this paper, the HFC system is introduced. A new method to implement the station acquisition process is proposed. The throughput and delay performance for the station random acquisition method are analyzed


More Xplore Articles

Educational Resources on ISDN

Back to Top

eLearning

Probe for measuring interference voltages at ISDN telecommunication line interfaces

N. Kuwabara; T. Ideguchi IEEE 1988 International Symposium on Electromagnetic Compatibility, 1988

A probe with asymmetrical characteristic impedance is proposed for measuring interference voltages at integrated services digital network (ISDN) line interfaces. The measurement error due to longitudinal conversion loss (LCL) of the telecommunication lines is studied. The investigation shows that the normal-mode interference voltages must be measured to estimate the common-mode voltages, which are converted from normal-mode voltages by unbalance of ...


Adaptive Interaction Fault Location Based on Combinatorial Testing

Ziyuan Wang; Baowen Xu; Lin Chen; Lei Xu 2010 10th International Conference on Quality Software, 2010

Combinatorial testing aims to detect interaction faults, which are triggered by interaction among parameters in system, by covering some specific combinations of parametric values. Most works about combinatorial testing focus on detecting such interaction faults rather than locating them. Based on the model of interaction fault schema, in which the interaction fault is described as a minimum fault schema and ...


A four-channel CMOS codec filter circuit “SICOFI-4”

M. Tiefenbacher; P. Caldera; F. Dielacher; J. Hauptmann; M. Steiner IEEE Journal of Solid-State Circuits, 1994

Cost reduction by integration of complex mixed analog-digital systems on a single chip and an excellent yield to area ratio is a major goal for IC design in the nineties. In this paper, a four-channel codec-filter chip for analog subscriber lines in ISDN-orientated networks is presented, giving an exceptional example for high level system implementation combined with parallel DSP integration ...


Development concept of STM-based high speed digital FTTH systems

S. -I. Aoyagi; K. -I. Sano; E. Yoneda Global Telecommunications Conference, 1991. GLOBECOM '91. 'Countdown to the New Millennium. Featuring a Mini-Theme on: Personal Communications Services, 1991

Various approaches to realizing economical FTTH (fiber-to-the-home) systems via the use of single mode fibers are being developed. A strategy is discussed for realizing such systems, especially STM (synchronous transfer mode) based high-speed digital FTTH systems, which can provide not only N-ISDN services but also high-speed digital services such as center-to-end video services. The first prototype system of a single-star ...


The implementation of station acquisition process for the hybrid fiber-coax network

Chen Huifang; Qiu Peiliang Communication Technology Proceedings, 1998. ICCT '98. 1998 International Conference on, 1998

It is widely recognized that the hybrid fiber-coax (HFC) networks remove customer broadband access "bottleneck" for the B-ISDN and information superhighway. In this paper, the HFC system is introduced. A new method to implement the station acquisition process is proposed. The throughput and delay performance for the station random acquisition method are analyzed


More eLearning Resources

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "ISDN"

IEEE-USA E-Books

  • CCS 7 Planning and Implementation

    This chapter contains sections titled: Introduction Performance Objectives CCS 7 Network Structure Implementation Planning for CCS 7 Selection of User Parts: Telephone User Part (TUP) versus ISDN User Part (ISUP) Monitoring CCS 7 Networks National CCS 7 Standards Remarks This chapter contains sections titled: References

  • Testing in CCS

    This chapter contains sections titled: Introduction Testing Equipment for CCS 7 On-Line Signaling Link Test Procedure Validation and Compatibility Testing CCS 7 Testing during Testing of a Switching System This chapter contains sections titled: References

  • Packet and Frame Mode Services in the ISDN

    This chapter contains sections titled: Introduction Minimum Integration Scenario Maximum Integration Scenario ISDN Frame Mode Bearer Services Remarks This chapter contains sections titled: References

  • A 12bit SigmaDelta AnalogtoDigital Converter with a 15MHz Clock Rate

    This paper presents a sigma-delta analog-to-digital converter that achieves 12-bit integral and differential linearity and nearly 13-bit resolution without trimming. The baseband width is 120 kHz with a first filter pole at 60 kHz, clock frequency is 15 MHz, and only one 5-V power supply is needed. The circuit was realized in a p-well CMOS technology with 3-¿m minimum feature size. Compared with sigma-delta modulators published up to now [1], [2], the input signal frequency and clock rate limit have been increased by one order of magnitude. To achieve this increase, a new integrator concept was developed using bidirectional current sources. The circuit is fully self contained, requiring only a 15-MHz crystal and one blocking capacitor as external elements. This converter was developed as the analog front end of a digital echo cancellation circuit for an integrated services digital network (ISDN).

  • Enterprise Networks II: Wide Area Networks

    This chapter contains sections titled: Wide Area Network Deployment The Concept of Packet Data Communications TCP/IP and Related Protocols Integrated Services Digital Networks (ISDN) Speeding Up the Network: Frame Relay Review Exercises References

  • Planning and Implementing the ISDN

    This chapter contains sections titled: Introduction Market and Policy-Related Issues Technical and Network-Related Activities This chapter contains sections titled: References

  • Testing in the ISDN

    This chapter contains sections titled: Introduction Layer 1 Tests Layer 2 and Layer 3 Tests Maintenance of ISDN Access This chapter contains sections titled: References

  • MultiLog2 N Networks and Their Applications in HighSpeed Electronic and Photonic Switching Systems

    A new class of switching networks has been proposed to remove the time and space bottlenecks of conventional RAM-controlled switching architectures. The proposed networks possess many desirable characteristics for high-speed electronic and photonic switching systems - such as tolerance of faults, _O_(log2 _N_) stages between each inlet-outlet pair, self-routing capability, easy path hunt, and easy fault diagnosis. Graph theory provides the theoretical basis for the proposed networks. It is shown tbat the key problem in the construction of this new class of networks is related to the coloring problem in graph theory.

  • Comparison of Buffering Strategies for Asymmetric Packet Switch Modules

    This paper analyzes the performance of a class of asymmetric packet switch modules with channel grouping. The switch module considered has _n_ inputs and _m_ outputs. A packet destined for a particular output address (out of _g_) needs to access only one of the _r_ available physical output ports; _m_ = _gr_. The motivation for the study of these switch modules is that they are the key building blocks in many large multistage switch architectures. We concentrate on the performance of input-buffered and output-buffered switch modules under geometrically bursty traffic. A combination of exact derivation, numerical analysis, and simulation yields the saturation throughput of input- buffered switch modules and the mean delay of the input-buffered and output- buffered switch modules. Tables and formulas useful for traffic engineering are presented. Our results show that increasing the number of output ports per output address (_r_) can significantly improve switch performance, especially when traffic is bursty. An interesting observation is that although output- buffered switch modules have significantly better performance than input- buffered switch modules when there are equal numbers of input and output ports, this performance difference becomes significantly smaller when the switch dimensions are asymmetric.

  • Timing in SONEY and SDH

    This chapter contains sections titled: Introduction SONET and SDH Frame Structures Network Synchronization in SONET and SDH Remarks This chapter contains sections titled: References



Standards related to ISDN

Back to Top

No standards are currently tagged "ISDN"


Jobs related to ISDN

Back to Top